General ⇒ Problems in fixing Errors

[MrJeMo11]

I am writing my 11th report in Latex at the moment. I am getting a bunch of error codes which I cannot find a solution for.

My preambles are:

Code: Select all

\documentclass[12pt,danish,a4paper]{report}
\usepackage[hang,bf,small]{caption}
\usepackage[T1]{fontenc} 
\usepackage[danish]{babel}
\usepackage[utf8]{inputenc}
\usepackage{
t1enc,
fancyhdr,
booktabs,
graphicx,
lmodern,
babel,
ulem,
microtype,
breakcites,
mhchem,
mathtools,
textcomp,
float,
url,
remreset
}
\makeatletter
\@removefromreset{footnote}{chapter}
\renewcommand\paragraph{
   \@startsection{paragraph}{4}{0mm}
      {-\baselineskip}
      {.5\baselineskip}
      {\normalfont\normalsize\bfseries}}
\makeatother

My table of contents is messing up because of this.

The errors are as following:

Code: Select all

LOG FILE :
This is pdfTeX, Version 3.1415926-1.40.11 (TeX Live 2010) (format=pdflatex 2011.2.28) 5 OCT 2011 18:05
entering extended mode
restricted \write18 enabled.
%&-line parsing enabled.
**"Rapport Vand.tex"
(./Rapport Vand.tex
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman-x-2009-06-19, ngerman-x-2009-06-19, ancientgreek, ibycus, arabic, armenian
, basque, bulgarian, catalan, pinyin, coptic, croatian, czech, danish, dutch, u
kenglish, usenglishmax, esperanto, estonian, farsi, finnish, french, galician,
german, ngerman, swissgerman, monogreek, greek, hungarian, icelandic, assamese,
bengali, gujarati, hindi, kannada, malayalam, marathi, oriya, panjabi, tamil,
telugu, indonesian, interlingua, irish, italian, kurmanji, lao, latin, latvian,
lithuanian, mongolian, mongolianlmc, bokmal, nynorsk, polish, portuguese, roma
nian, russian, sanskrit, serbian, slovak, slovenian, spanish, swedish, turkish,
turkmen, ukrainian, uppersorbian, welsh, loaded.
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/report.cls
Document Class: report 2007/10/19 v1.4h Standard LaTeX document class
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/size12.clo
File: size12.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\c@part=\count79
\c@chapter=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\c@figure=\count86
\c@table=\count87
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/caption/caption.sty
Package: caption 2010/01/09 v3.1m Customizing captions (AR)
(/usr/local/texlive/2010/texmf-dist/tex/latex/caption/caption3.sty
Package: caption3 2010/01/14 v3.1m caption3 kernel (AR)
(/usr/local/texlive/2010/texmf-dist/tex/latex/graphics/keyval.sty
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
\captionmargin=\dimen103
\captionmargin@=\dimen104
\captionwidth=\dimen105
\caption@indent=\dimen106
\caption@parindent=\dimen107
\caption@hangindent=\dimen108
)
\c@ContinuedFloat=\count88
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/fontenc.sty
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/t1enc.def
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
(/usr/local/texlive/2010/texmf-dist/tex/generic/babel/babel.sty
Package: babel 2008/07/06 v3.8l The Babel package
(/usr/local/texlive/2010/texmf-dist/tex/generic/babel/danish.ldf
Language: danish 2009/09/19 v1.3r Danish support from the babel system
(/usr/local/texlive/2010/texmf-dist/tex/generic/babel/babel.def
File: babel.def 2008/07/06 v3.8l Babel common definitions
\babel@savecnt=\count89
\U@D=\dimen109
)
Package babel Info: Making " an active character on input line 82.
))
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/inputenc.sty
Package: inputenc 2008/03/30 v1.1d Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/utf8.def
File: utf8.def 2008/04/05 v1.1m UTF-8 support for inputenc
Now handling font encoding OML ...
... no UTF-8 mapping file for font encoding OML
Now handling font encoding T1 ...
... processing UTF-8 mapping file for font encoding T1
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/t1enc.dfu
File: t1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
defining Unicode char U+00A1 (decimal 161)
defining Unicode char U+00A3 (decimal 163)
defining Unicode char U+00AB (decimal 171)
defining Unicode char U+00BB (decimal 187)
defining Unicode char U+00BF (decimal 191)
defining Unicode char U+00C0 (decimal 192)
defining Unicode char U+00C1 (decimal 193)
defining Unicode char U+00C2 (decimal 194)
defining Unicode char U+00C3 (decimal 195)
defining Unicode char U+00C4 (decimal 196)
defining Unicode char U+00C5 (decimal 197)
defining Unicode char U+00C6 (decimal 198)
defining Unicode char U+00C7 (decimal 199)
defining Unicode char U+00C8 (decimal 200)
defining Unicode char U+00C9 (decimal 201)
defining Unicode char U+00CA (decimal 202)
defining Unicode char U+00CB (decimal 203)
defining Unicode char U+00CC (decimal 204)
defining Unicode char U+00CD (decimal 205)
defining Unicode char U+00CE (decimal 206)
defining Unicode char U+00CF (decimal 207)
defining Unicode char U+00D0 (decimal 208)
defining Unicode char U+00D1 (decimal 209)
defining Unicode char U+00D2 (decimal 210)
defining Unicode char U+00D3 (decimal 211)
defining Unicode char U+00D4 (decimal 212)
defining Unicode char U+00D5 (decimal 213)
defining Unicode char U+00D6 (decimal 214)
defining Unicode char U+00D8 (decimal 216)
defining Unicode char U+00D9 (decimal 217)
defining Unicode char U+00DA (decimal 218)
defining Unicode char U+00DB (decimal 219)
defining Unicode char U+00DC (decimal 220)
defining Unicode char U+00DD (decimal 221)
defining Unicode char U+00DE (decimal 222)
defining Unicode char U+00DF (decimal 223)
defining Unicode char U+00E0 (decimal 224)
defining Unicode char U+00E1 (decimal 225)
defining Unicode char U+00E2 (decimal 226)
defining Unicode char U+00E3 (decimal 227)
defining Unicode char U+00E4 (decimal 228)
defining Unicode char U+00E5 (decimal 229)
defining Unicode char U+00E6 (decimal 230)
defining Unicode char U+00E7 (decimal 231)
defining Unicode char U+00E8 (decimal 232)
defining Unicode char U+00E9 (decimal 233)
defining Unicode char U+00EA (decimal 234)
defining Unicode char U+00EB (decimal 235)
defining Unicode char U+00EC (decimal 236)
defining Unicode char U+00ED (decimal 237)
defining Unicode char U+00EE (decimal 238)
defining Unicode char U+00EF (decimal 239)
defining Unicode char U+00F0 (decimal 240)
defining Unicode char U+00F1 (decimal 241)
defining Unicode char U+00F2 (decimal 242)
defining Unicode char U+00F3 (decimal 243)
defining Unicode char U+00F4 (decimal 244)
defining Unicode char U+00F5 (decimal 245)
defining Unicode char U+00F6 (decimal 246)
defining Unicode char U+00F8 (decimal 248)
defining Unicode char U+00F9 (decimal 249)
defining Unicode char U+00FA (decimal 250)
defining Unicode char U+00FB (decimal 251)
defining Unicode char U+00FC (decimal 252)
defining Unicode char U+00FD (decimal 253)
defining Unicode char U+00FE (decimal 254)
defining Unicode char U+00FF (decimal 255)
defining Unicode char U+0102 (decimal 258)
defining Unicode char U+0103 (decimal 259)
defining Unicode char U+0104 (decimal 260)
defining Unicode char U+0105 (decimal 261)
defining Unicode char U+0106 (decimal 262)
defining Unicode char U+0107 (decimal 263)
defining Unicode char U+010C (decimal 268)
defining Unicode char U+010D (decimal 269)
defining Unicode char U+010E (decimal 270)
defining Unicode char U+010F (decimal 271)
defining Unicode char U+0110 (decimal 272)
defining Unicode char U+0111 (decimal 273)
defining Unicode char U+0118 (decimal 280)
defining Unicode char U+0119 (decimal 281)
defining Unicode char U+011A (decimal 282)
defining Unicode char U+011B (decimal 283)
defining Unicode char U+011E (decimal 286)
defining Unicode char U+011F (decimal 287)
defining Unicode char U+0130 (decimal 304)
defining Unicode char U+0131 (decimal 305)
defining Unicode char U+0132 (decimal 306)
defining Unicode char U+0133 (decimal 307)
defining Unicode char U+0139 (decimal 313)
defining Unicode char U+013A (decimal 314)
defining Unicode char U+013D (decimal 317)
defining Unicode char U+013E (decimal 318)
defining Unicode char U+0141 (decimal 321)
defining Unicode char U+0142 (decimal 322)
defining Unicode char U+0143 (decimal 323)
defining Unicode char U+0144 (decimal 324)
defining Unicode char U+0147 (decimal 327)
defining Unicode char U+0148 (decimal 328)
defining Unicode char U+014A (decimal 330)
defining Unicode char U+014B (decimal 331)
defining Unicode char U+0150 (decimal 336)
defining Unicode char U+0151 (decimal 337)
defining Unicode char U+0152 (decimal 338)
defining Unicode char U+0153 (decimal 339)
defining Unicode char U+0154 (decimal 340)
defining Unicode char U+0155 (decimal 341)
defining Unicode char U+0158 (decimal 344)
defining Unicode char U+0159 (decimal 345)
defining Unicode char U+015A (decimal 346)
defining Unicode char U+015B (decimal 347)
defining Unicode char U+015E (decimal 350)
defining Unicode char U+015F (decimal 351)
defining Unicode char U+0160 (decimal 352)
defining Unicode char U+0161 (decimal 353)
defining Unicode char U+0162 (decimal 354)
defining Unicode char U+0163 (decimal 355)
defining Unicode char U+0164 (decimal 356)
defining Unicode char U+0165 (decimal 357)
defining Unicode char U+016E (decimal 366)
defining Unicode char U+016F (decimal 367)
defining Unicode char U+0170 (decimal 368)
defining Unicode char U+0171 (decimal 369)
defining Unicode char U+0178 (decimal 376)
defining Unicode char U+0179 (decimal 377)
defining Unicode char U+017A (decimal 378)
defining Unicode char U+017B (decimal 379)
defining Unicode char U+017C (decimal 380)
defining Unicode char U+017D (decimal 381)
defining Unicode char U+017E (decimal 382)
defining Unicode char U+200C (decimal 8204)
defining Unicode char U+2013 (decimal 8211)
defining Unicode char U+2014 (decimal 8212)
defining Unicode char U+2018 (decimal 8216)
defining Unicode char U+2019 (decimal 8217)
defining Unicode char U+201A (decimal 8218)
defining Unicode char U+201C (decimal 8220)
defining Unicode char U+201D (decimal 8221)
defining Unicode char U+201E (decimal 8222)
defining Unicode char U+2030 (decimal 8240)
defining Unicode char U+2031 (decimal 8241)
defining Unicode char U+2039 (decimal 8249)
defining Unicode char U+203A (decimal 8250)
defining Unicode char U+2423 (decimal 9251)
)
Now handling font encoding OT1 ...
... processing UTF-8 mapping file for font encoding OT1
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/ot1enc.dfu
File: ot1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
defining Unicode char U+00A1 (decimal 161)
defining Unicode char U+00A3 (decimal 163)
defining Unicode char U+00B8 (decimal 184)
defining Unicode char U+00BF (decimal 191)
defining Unicode char U+00C5 (decimal 197)
defining Unicode char U+00C6 (decimal 198)
defining Unicode char U+00D8 (decimal 216)
defining Unicode char U+00DF (decimal 223)
defining Unicode char U+00E6 (decimal 230)
defining Unicode char U+00EC (decimal 236)
defining Unicode char U+00ED (decimal 237)
defining Unicode char U+00EE (decimal 238)
defining Unicode char U+00EF (decimal 239)
defining Unicode char U+00F8 (decimal 248)
defining Unicode char U+0131 (decimal 305)
defining Unicode char U+0141 (decimal 321)
defining Unicode char U+0142 (decimal 322)
defining Unicode char U+0152 (decimal 338)
defining Unicode char U+0153 (decimal 339)
defining Unicode char U+2013 (decimal 8211)
defining Unicode char U+2014 (decimal 8212)
defining Unicode char U+2018 (decimal 8216)
defining Unicode char U+2019 (decimal 8217)
defining Unicode char U+201C (decimal 8220)
defining Unicode char U+201D (decimal 8221)
)
Now handling font encoding OMS ...
... processing UTF-8 mapping file for font encoding OMS
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/omsenc.dfu
File: omsenc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
defining Unicode char U+00A7 (decimal 167)
defining Unicode char U+00B6 (decimal 182)
defining Unicode char U+00B7 (decimal 183)
defining Unicode char U+2020 (decimal 8224)
defining Unicode char U+2021 (decimal 8225)
defining Unicode char U+2022 (decimal 8226)
)
Now handling font encoding OMX ...
... no UTF-8 mapping file for font encoding OMX
Now handling font encoding U ...
... no UTF-8 mapping file for font encoding U
defining Unicode char U+00A9 (decimal 169)
defining Unicode char U+00AA (decimal 170)
defining Unicode char U+00AE (decimal 174)
defining Unicode char U+00BA (decimal 186)
defining Unicode char U+02C6 (decimal 710)
defining Unicode char U+02DC (decimal 732)
defining Unicode char U+200C (decimal 8204)
defining Unicode char U+2026 (decimal 8230)
defining Unicode char U+2122 (decimal 8482)
defining Unicode char U+2423 (decimal 9251)
))
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/t1enc.sty
Package: t1enc 1994/06/01 Standard LaTeX package
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
\fancy@headwidth=\skip43
\f@ncyO@elh=\skip44
\f@ncyO@erh=\skip45
\f@ncyO@olh=\skip46
\f@ncyO@orh=\skip47
\f@ncyO@elf=\skip48
\f@ncyO@erf=\skip49
\f@ncyO@olf=\skip50
\f@ncyO@orf=\skip51
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/booktabs/booktabs.sty
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen110
\lightrulewidth=\dimen111
\cmidrulewidth=\dimen112
\belowrulesep=\dimen113
\belowbottomsep=\dimen114
\aboverulesep=\dimen115
\abovetopsep=\dimen116
\cmidrulesep=\dimen117
\cmidrulekern=\dimen118
\defaultaddspace=\dimen119
\@cmidla=\count90
\@cmidlb=\count91
\@aboverulesep=\dimen120
\@belowrulesep=\dimen121
\@thisruleclass=\count92
\@lastruleclass=\count93
\@thisrulewidth=\dimen122
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/graphics/graphicx.sty
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
(/usr/local/texlive/2010/texmf-dist/tex/latex/graphics/graphics.sty
Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)
(/usr/local/texlive/2010/texmf-dist/tex/latex/graphics/trig.sty
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/latexconfig/graphics.cfg
File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live
)
Package graphics Info: Driver file: pdftex.def on input line 91.
(/usr/local/texlive/2010/texmf-dist/tex/latex/pdftex-def/pdftex.def
File: pdftex.def 2010/02/14 v0.04n Graphics/color for pdfTeX
\Gread@gobject=\count94
))
\Gin@req@height=\dimen123
\Gin@req@width=\dimen124
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/lmodern.sty
Package: lmodern 2009/10/30 v1.6 Latin Modern Fonts
LaTeX Font Info: Overwriting symbol font `operators' in version `normal'
(Font) OT1/cmr/m/n --> OT1/lmr/m/n on input line 22.
LaTeX Font Info: Overwriting symbol font `letters' in version `normal'
(Font) OML/cmm/m/it --> OML/lmm/m/it on input line 23.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/cmsy/m/n --> OMS/lmsy/m/n on input line 24.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal'
(Font) OMX/cmex/m/n --> OMX/lmex/m/n on input line 25.
LaTeX Font Info: Overwriting symbol font `operators' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 26.
LaTeX Font Info: Overwriting symbol font `letters' in version `bold'
(Font) OML/cmm/b/it --> OML/lmm/b/it on input line 27.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/cmsy/b/n --> OMS/lmsy/b/n on input line 28.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold'
(Font) OMX/cmex/m/n --> OMX/lmex/m/n on input line 29.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 31.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `normal'
(Font) OT1/cmss/m/n --> OT1/lmss/m/n on input line 32.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal'
(Font) OT1/cmr/m/it --> OT1/lmr/m/it on input line 33.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `normal'
(Font) OT1/cmtt/m/n --> OT1/lmtt/m/n on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `bold'
(Font) OT1/cmss/bx/n --> OT1/lmss/bx/n on input line 36.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold'
(Font) OT1/cmr/bx/it --> OT1/lmr/bx/it on input line 37.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `bold'
(Font) OT1/cmtt/m/n --> OT1/lmtt/m/n on input line 38.
)
(/usr/local/texlive/2010/texmf-dist/tex/generic/ulem/ulem.sty
\UL@box=\box26
\UL@hyphenbox=\box27
\UL@skip=\skip52
\UL@hook=\toks17
\UL@pe=\count95
\UL@pixel=\dimen125
\ULC@box=\box28
Package: ulem 2010/01/21
\ULdepth=\dimen126
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/microtype/microtype.sty
Package: microtype 2010/01/10 v2.4 Micro-typography with pdfTeX (RS)
\MT@toks=\toks18
\MT@count=\count96
LaTeX Info: Redefining \lsstyle on input line 1597.
LaTeX Info: Redefining \lslig on input line 1597.
\MT@outer@space=\skip53
LaTeX Info: Redefining \textls on input line 1605.
\MT@outer@kern=\dimen127
LaTeX Info: Redefining \textmicrotypecontext on input line 2156.
Package microtype Info: Loading configuration file microtype.cfg.
(/usr/local/texlive/2010/texmf-dist/tex/latex/microtype/microtype.cfg
File: microtype.cfg 2010/01/10 v2.4 microtype main configuration file (RS)
))
(/usr/local/texlive/2010/texmf-dist/tex/latex/breakcites/breakcites.sty)
(/usr/local/texlive/2010/texmf-dist/tex/latex/mhchem/mhchem.sty
Package: mhchem 2010/06/16 v3.08 for typesetting chemical formulae
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/ifthen.sty
Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC)
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/tools/calc.sty
Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ)
\calc@Acount=\count97
\calc@Bcount=\count98
\calc@Adimen=\dimen128
\calc@Bdimen=\dimen129
\calc@Askip=\skip54
\calc@Bskip=\skip55
LaTeX Info: Redefining \setlength on input line 76.
LaTeX Info: Redefining \addtolength on input line 77.
\calc@Ccount=\count99
\calc@Cskip=\skip56
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/oberdiek/twoopt.sty
Package: twoopt 2008/08/11 v1.5 Definitions with two optional arguments (HO)
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/amsmath/amsmath.sty
Package: amsmath 2000/07/18 v2.13 AMS math features
\@mathmargin=\skip57
For additional information on amsmath, use the `?' option.
(/usr/local/texlive/2010/texmf-dist/tex/latex/amsmath/amstext.sty
Package: amstext 2000/06/29 v2.01
(/usr/local/texlive/2010/texmf-dist/tex/latex/amsmath/amsgen.sty
File: amsgen.sty 1999/11/30 v2.0
\@emptytoks=\toks19
\ex@=\dimen130
))
(/usr/local/texlive/2010/texmf-dist/tex/latex/amsmath/amsbsy.sty
Package: amsbsy 1999/11/29 v1.2d
\pmbraise@=\dimen131
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/amsmath/amsopn.sty
Package: amsopn 1999/12/14 v2.01 operator names
)
\inf@bad=\count100
LaTeX Info: Redefining \frac on input line 211.
\uproot@=\count101
\leftroot@=\count102
LaTeX Info: Redefining \overline on input line 307.
\classnum@=\count103
\DOTSCASE@=\count104
LaTeX Info: Redefining \ldots on input line 379.
LaTeX Info: Redefining \dots on input line 382.
LaTeX Info: Redefining \cdots on input line 467.
\Mathstrutbox@=\box29
\strutbox@=\box30
\big@size=\dimen132
LaTeX Font Info: Redeclaring font encoding OML on input line 567.
LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
\macc@depth=\count105
\c@MaxMatrixCols=\count106
\dotsspace@=\muskip10
\c@parentequation=\count107
\dspbrk@lvl=\count108
\tag@help=\toks20
\row@=\count109
\column@=\count110
\maxfields@=\count111
\andhelp@=\toks21
\eqnshift@=\dimen133
\alignsep@=\dimen134
\tagshift@=\dimen135
\tagwidth@=\dimen136
\totwidth@=\dimen137
\lineht@=\dimen138
\@envbody=\toks22
\multlinegap=\skip58
\multlinetaggap=\skip59
\mathdisplay@stack=\toks23
LaTeX Info: Redefining \[ on input line 2666.
LaTeX Info: Redefining \] on input line 2667.
)
\tok@mhchem@ce@iii=\toks24
\mhchem@arrowminlength=\skip60
\mhchem@arrows@box=\box31
\mhchem@arrowlength@pgf=\skip61
\mhchem@arrowminlength@pgf=\skip62
\mhchem@bondwidth=\skip63
\mhchem@bondheight=\skip64
\mhchem@smallbondwidth@tmpA=\skip65
\mhchem@smallbondwidth@tmpB=\skip66
\mhchem@smallbondwidth=\skip67
\mhchem@cf@element=\toks25
\mhchem@cf@number=\toks26
\mhchem@cf@sup=\toks27
\tok@mhchem@cf@i=\toks28
\c@mhchem@cf@length=\count112
\mhchem@cf@replaceminus@tok=\toks29
\mhchem@option@minussidebearingleft=\skip68
\mhchem@option@minussidebearingright=\skip69
Package mhchem Warning: You did not specify a 'version' option for the mhchem
(mhchem) package. This means you EITHER have an existing
(mhchem) document and mhchem was updated to a newer version.
(mhchem) Please check the mhchem manual in that case! OR, you
(mhchem) are about to create a new document; in this case,
(mhchem) please write \usepackage[version=3]{mhchem} in your pre
amble in
(mhchem) order to use the most recent version of mhchem.
) (/usr/local/texlive/2010/texmf-dist/tex/latex/mh/mathtools.sty
Package: mathtools 2010/07/11 v1.08 mathematical typesetting tools (MH)
(/usr/local/texlive/2010/texmf-dist/tex/latex/mh/mhsetup.sty
Package: mhsetup 2010/01/21 v1.2a programming setup (MH)
)
\g_MT_multlinerow_int=\count113
\l_MT_multwidth_dim=\dimen139
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/textcomp.sty
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/ts1enc.def
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
Now handling font encoding TS1 ...
... processing UTF-8 mapping file for font encoding TS1
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/ts1enc.dfu
File: ts1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc
defining Unicode char U+00A2 (decimal 162)
defining Unicode char U+00A3 (decimal 163)
defining Unicode char U+00A4 (decimal 164)
defining Unicode char U+00A5 (decimal 165)
defining Unicode char U+00A6 (decimal 166)
defining Unicode char U+00A7 (decimal 167)
defining Unicode char U+00A8 (decimal 168)
defining Unicode char U+00A9 (decimal 169)
defining Unicode char U+00AA (decimal 170)
defining Unicode char U+00AC (decimal 172)
defining Unicode char U+00AE (decimal 174)
defining Unicode char U+00AF (decimal 175)
defining Unicode char U+00B0 (decimal 176)
defining Unicode char U+00B1 (decimal 177)
defining Unicode char U+00B2 (decimal 178)
defining Unicode char U+00B3 (decimal 179)
defining Unicode char U+00B4 (decimal 180)
defining Unicode char U+00B5 (decimal 181)
defining Unicode char U+00B6 (decimal 182)
defining Unicode char U+00B7 (decimal 183)
defining Unicode char U+00B9 (decimal 185)
defining Unicode char U+00BA (decimal 186)
defining Unicode char U+00BC (decimal 188)
defining Unicode char U+00BD (decimal 189)
defining Unicode char U+00BE (decimal 190)
defining Unicode char U+00D7 (decimal 215)
defining Unicode char U+00F7 (decimal 247)
defining Unicode char U+0192 (decimal 402)
defining Unicode char U+02C7 (decimal 711)
defining Unicode char U+02D8 (decimal 728)
defining Unicode char U+02DD (decimal 733)
defining Unicode char U+0E3F (decimal 3647)
defining Unicode char U+2016 (decimal 8214)
defining Unicode char U+2020 (decimal 8224)
defining Unicode char U+2021 (decimal 8225)
defining Unicode char U+2022 (decimal 8226)
defining Unicode char U+2030 (decimal 8240)
defining Unicode char U+2031 (decimal 8241)
defining Unicode char U+203B (decimal 8251)
defining Unicode char U+203D (decimal 8253)
defining Unicode char U+2044 (decimal 8260)
defining Unicode char U+204E (decimal 8270)
defining Unicode char U+2052 (decimal 8274)
defining Unicode char U+20A1 (decimal 8353)
defining Unicode char U+20A4 (decimal 8356)
defining Unicode char U+20A6 (decimal 8358)
defining Unicode char U+20A9 (decimal 8361)
defining Unicode char U+20AB (decimal 8363)
defining Unicode char U+20AC (decimal 8364)
defining Unicode char U+20B1 (decimal 8369)
defining Unicode char U+2103 (decimal 8451)
defining Unicode char U+2116 (decimal 8470)
defining Unicode char U+2117 (decimal 8471)
defining Unicode char U+211E (decimal 8478)
defining Unicode char U+2120 (decimal 8480)
defining Unicode char U+2122 (decimal 8482)
defining Unicode char U+2126 (decimal 8486)
defining Unicode char U+2127 (decimal 8487)
defining Unicode char U+212E (decimal 8494)
defining Unicode char U+2190 (decimal 8592)
defining Unicode char U+2191 (decimal 8593)
defining Unicode char U+2192 (decimal 8594)
defining Unicode char U+2193 (decimal 8595)
defining Unicode char U+2329 (decimal 9001)
defining Unicode char U+232A (decimal 9002)
defining Unicode char U+2422 (decimal 9250)
defining Unicode char U+25E6 (decimal 9702)
defining Unicode char U+25EF (decimal 9711)
defining Unicode char U+266A (decimal 9834)
))
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.
Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/float/float.sty
Package: float 2001/11/08 v1.3d Float enhancements (AL)
\c@float@type=\count114
\float@exts=\toks30
\float@box=\box32
\@float@everytoks=\toks31
\@floatcapt=\box33
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/url/url.sty
\Urlmuskip=\muskip11
Package: url 2006/04/12 ver 3.3 Verb mode for urls, etc.
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/carlisle/remreset.sty)
(./Rapport Vand.aux)
\openout1 = `"Rapport Vand.aux"'.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 32.
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 32.
LaTeX Font Info: Try loading font information for TS1+cmr on input line 32.
(/usr/local/texlive/2010/texmf-dist/tex/latex/base/ts1cmr.fd
File: ts1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 32.
LaTeX Font Info: Try loading font information for T1+lmr on input line 32.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/t1lmr.fd
File: t1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
Package caption Info: Begin \AtBeginDocument code.
Package caption Info: float package is loaded.
Package caption Info: End \AtBeginDocument code.
(/usr/local/texlive/2010/texmf-dist/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
\scratchcounter=\count115
\scratchdimen=\dimen140
\scratchbox=\box34
\nofMPsegments=\count116
\nofMParguments=\count117
\everyMPshowfont=\toks32
\MPscratchCnt=\count118
\MPscratchDim=\dimen141
\MPnumerator=\count119
\everyMPtoPDFconversion=\toks33
) (/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
Package: pdftexcmds 2010/04/01 v0.9 Utility functions of pdfTeX for LuaTeX (HO)
(/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/infwarerr.sty
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
)
(/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/ifluatex.sty
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
)
(/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
Package: ltxcmds 2010/04/26 v1.7 LaTeX kernel commands for general use (HO)
)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
Package: epstopdf-base 2010/02/09 v2.5 Base part for package epstopdf
(/usr/local/texlive/2010/texmf-dist/tex/latex/oberdiek/grfext.sty
Package: grfext 2007/09/30 v1.0 Managing graphics extensions (HO)
)
(/usr/local/texlive/2010/texmf-dist/tex/latex/oberdiek/kvoptions.sty
Package: kvoptions 2010/02/22 v3.7 Keyval support for LaTeX options (HO)
(/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty
Package: kvsetkeys 2010/03/01 v1.9 Key value parser (HO)
(/usr/local/texlive/2010/texmf-dist/tex/generic/oberdiek/etexcmds.sty
Package: etexcmds 2010/01/28 v1.3 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds) That can mean that you are not using pdfTeX 1.50 or
(etexcmds) that some package has redefined \expanded.
(etexcmds) In the latter case, load this package earlier.
)))
Package grfext Info: Graphics extension search list:
(grfext) [.png,.pdf,.jpg,.mps,.jpeg,.jbig2,.jb2,.PNG,.PDF,.JPG,.JPE
G,.JBIG2,.JB2,.eps]
(grfext) \AppendGraphicsExtensions on input line 436.
(/usr/local/texlive/2010/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
e
))
LaTeX Info: Redefining \microtypecontext on input line 32.
Package microtype Info: Generating PDF output.
Package microtype Info: Character protrusion enabled (level 2).
Package microtype Info: Using default protrusion set `alltext'.
Package microtype Info: Automatic font expansion enabled (level 2),
(microtype) stretch: 20, shrink: 20, step: 1, non-selected.
Package microtype Info: Using default expansion set `basictext'.
Package microtype Info: No tracking.
Package microtype Info: No adjustment of interword spacing.
Package microtype Info: No adjustment of character kerning.
(/usr/local/texlive/2010/texmf-dist/tex/latex/microtype/mt-cmr.cfg
File: mt-cmr.cfg 2009/11/09 v2.0 microtype config. file: Computer Modern Roman
(RS)
)
LaTeX Font Info: Try loading font information for T1+lmss on input line 35.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/t1lmss.fd
File: t1lmss.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
LaTeX Font Info: Try loading font information for OT1+lmr on input line 35.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/ot1lmr.fd
File: ot1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
LaTeX Font Info: Try loading font information for OML+lmm on input line 35.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/omllmm.fd
File: omllmm.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
LaTeX Font Info: Try loading font information for OMS+lmsy on input line 35.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/omslmsy.fd
File: omslmsy.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
LaTeX Font Info: Try loading font information for OMX+lmex on input line 35.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/omxlmex.fd
File: omxlmex.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <14.4> on input line 35.
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <10> on input line 35.
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <7> on input line 35.
LaTeX Warning: No \author given.
[1
{/usr/local/texlive/2010/texmf-var/fonts/map/pdftex/updmap/pdftex.map}]
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <12> on input line 48.
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <8> on input line 48.
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <6> on input line 48.
[1] (./Rapport Vand.toc
Runaway argument?
{Dissociation \let \reserved@d =[\def
! Paragraph ended before \@dottedtocline was complete.
<to be read again>
\par
l.6 ...}{Dissociation \let \reserved@d =[\def \par
}{4}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
! Extra }, or forgotten \endgroup.
l.6 ...Dissociation \let \reserved@d =[\def \par }
{4}
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
Runaway argument?
{Den konstante fordampning \let \reserved@d =[\def
! Paragraph ended before \@dottedtocline was complete.
<to be read again>
\par
l.7 ...te fordampning \let \reserved@d =[\def \par
}{5}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
! Extra }, or forgotten \endgroup.
l.7 ... fordampning \let \reserved@d =[\def \par }
{5}
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
Runaway argument?
{Airconditionens opbygning \let \reserved@d =[\def
! Paragraph ended before \@dottedtocline was complete.
<to be read again>
\par
l.11 ...ens opbygning \let \reserved@d =[\def \par
}{9}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
! Extra }, or forgotten \endgroup.
l.11 ...s opbygning \let \reserved@d =[\def \par }
{9}
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
Runaway argument?
{Airconditionens historie \let \reserved@d =[\def
! Paragraph ended before \@dottedtocline was complete.
<to be read again>
\par
l.12 ...nens historie \let \reserved@d =[\def \par
}{9}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
! Extra }, or forgotten \endgroup.
l.12 ...ns historie \let \reserved@d =[\def \par }
{9}
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
)
\tf@toc=\write3
\openout3 = `"Rapport Vand.toc"'.
[2
]
Kapitel 1.
LaTeX Font Info: Try loading font information for TS1+lmr on input line 81.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/ts1lmr.fd
File: ts1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
Overfull \hbox (35.87683pt too wide) in paragraph at lines 75--125
[][]
[]
[3
]
LaTeX Font Info: External font `lmex10' loaded for size
(Font) <5> on input line 125.
LaTeX Font Info: Try loading font information for T1+lmtt on input line 125.
(/usr/local/texlive/2010/texmf-dist/tex/latex/lm/t1lmtt.fd
File: t1lmtt.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
! Argument of \@sect has an extra }.
<inserted text>
\par
l.130 ...note{Kemi 2000 B-Niveau af Helge Mygind}}
I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.
Runaway argument?
{\normalfont \normalsize \bfseries }{\@xfootnote }\def \reserved@b {\stepcounte
r \ETC.
! Paragraph ended before \@sect was complete.
<to be read again>
\par
l.130 ...note{Kemi 2000 B-Niveau af Helge Mygind}}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
[4] <Vanddipol.png, id=32, 201.3924pt x 156.1032pt>
File: Vanddipol.png Graphic file (type png)
<use Vanddipol.png>
! Argument of \@sect has an extra }.
<inserted text>
\par
l.142 ...al evaporation af R.J. Granger} - Jesper}
I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.
Runaway argument?
{\normalfont \normalsize \bfseries }{\@xfootnote }\def \reserved@b {\stepcounte
r \ETC.
! Paragraph ended before \@sect was complete.
<to be read again>
\par
l.142 ...al evaporation af R.J. Granger} - Jesper}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
[5 <./Vanddipol.png>]
Overfull \hbox (27.06885pt too wide) in paragraph at lines 150--158
[][]
[]
Underfull \hbox (badness 10000) in paragraph at lines 167--167
[][]$\T1/lmtt/m/n/10 http : / / www . denstoredanske . dk / Krop ,[] _psyke _ o
g _ sundhed / Sundhedsvidenskab /
[]
Underfull \hbox (badness 10000) in paragraph at lines 172--172
[][]$\T1/lmtt/m/n/10 http : / / www . towards-[]sustainability . co . uk / arti
cles / rainharvesting . html$
[]
[6]
Underfull \hbox (badness 10000) in paragraph at lines 177--177
[][]$\T1/lmtt/m/n/10 http : / / viden . jp . dk / klima / destinationer / kina
/ reportager / default . asp ?
[]
Underfull \hbox (badness 10000) in paragraph at lines 181--181
[][]$\T1/lmtt/m/n/10 http : / / ing . dk / artikel / 72303-[]vandkoeling-[]skal
-[]afloese-[]aircondition$
[]
[7] [8]
! Argument of \@sect has an extra }.
<inserted text>
\par
l.185 ...ditionens opbygning. Dermed ingen tekst}}
I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.
Runaway argument?
{\normalfont \normalsize \bfseries }{\@xfootnote }\def \reserved@b {\stepcounte
r \ETC.
! Paragraph ended before \@sect was complete.
<to be read again>
\par
l.185 ...ditionens opbygning. Dermed ingen tekst}}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
<Air_conditioning_unit-en.png, id=53, 929.071pt x 776.501pt>
File: Air_conditioning_unit-en.png Graphic file (type png)
<use Air_conditioning_unit-en.png>
Underfull \hbox (badness 10000) in paragraph at lines 196--196
[][]$\T1/lmtt/m/n/10 http : / / www . facstaff . bucknell . edu / mvigeant / th
erm _ 1 / AC _ final / bg . htm$
[]
! Argument of \@sect has an extra }.
<inserted text>
\par
l.196 ...ant/therm_1/AC_final/bg.htm} (23.08.11)}}
I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.
Runaway argument?
{\normalfont \normalsize \bfseries }{\@xfootnote }\def \reserved@b {\stepcounte
r \ETC.
! Paragraph ended before \@sect was complete.
<to be read again>
\par
l.196 ...ant/therm_1/AC_final/bg.htm} (23.08.11)}}
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.
[9 <./Air_conditioning_unit-en.png>]
<Udklip.PNG, id=58, 624.83438pt x 217.5628pt>
File: Udklip.PNG Graphic file (type png)
<use Udklip.PNG> [10] [11 <./Udklip.PNG>]
Kapitel 2.
<Materialer.png, id=66, 551.05875pt x 317.185pt>
File: Materialer.png Graphic file (type png)
<use Materialer.png>
Overfull \hbox (5.61266pt too wide) in paragraph at lines 256--279
[][]
[]
[12
<./Materialer.png>] [13] <Ide3.png, id=76, 230.8625pt x 221.82875pt>
File: Ide3.png Graphic file (type png)
<use Ide3.png> <Ide2m.png, id=77, 100.375pt x 250.9375pt>
File: Ide2m.png Graphic file (type png)
<use Ide2m.png>
<m1.png, id=78, 132.495pt x 131.49126pt>
File: m1.png Graphic file (type png)
<use m1.png> [14 <./Ide3.png (PNG copy)> <./Ide2m.png (PNG copy)>] <m2.png, id
=83, 134.5025pt x 128.48pt>
File: m2.png Graphic file (type png)
<use m2.png> <m3.png, id=84, 128.48pt x 125.46875pt>
File: m3.png Graphic file (type png)
<use m3.png>
<Ide1.png, id=85, 110.4125pt x 250.9375pt>
File: Ide1.png Graphic file (type png)
<use Ide1.png> [15 <./m1.png (PNG copy)> <./m2.png (PNG copy)> <./m3.png (PNG
copy)> <./Ide1.png (PNG copy)>]
<nyide.png, id=89, 66.4884pt x 71.5473pt>
File: nyide.png Graphic file (type png)
<use nyide.png>
Overfull \hbox (20.5389pt too wide) in paragraph at lines 379--398
[][]
[]
[16 <./nyide.png (PNG copy)>] <Kuldegrav1.png, id=93, 110.5731pt x 57.816pt>
File: Kuldegrav1.png Graphic file (type png)
<use Kuldegrav1.png> [17 <./Kuldegrav1.png (PNG copy)>] [18] [19] [20] [21]
<Untitled.pdf, id=111, 597.23125pt x 845.1575pt>
File: Untitled.pdf Graphic file (type pdf)
<use Untitled.pdf>
Overfull \hbox (28.05902pt too wide) in paragraph at lines 499--501
[][]
[]
[22]
Overfull \vbox (9.25346pt too high) has occurred while \output is active []
[23 <./Untitled.pdf>] <Del1.png, id=124, 963.6pt x 651.43375pt>
File: Del1.png Graphic file (type png)
<use Del1.png>
<Del2.png, id=125, 963.6pt x 651.43375pt>
File: Del2.png Graphic file (type png)
<use Del2.png> [24 <./Del1.png (PNG copy)> <./Del2.png (PNG copy)>] <Scan.png,
id=130, 36.135pt x 65.5248pt>
File: Scan.png Graphic file (type png)
<use Scan.png> <Del3.png, id=131, 416.757pt x 281.853pt>
File: Del3.png Graphic file (type png)
<use Del3.png>
<Del4.png, id=132, 416.757pt x 281.853pt>
File: Del4.png Graphic file (type png)
<use Del4.png> [25 <./Scan.png> <./Del3.png>] <IMG_0138.jpg, id=138, 722.7pt x
963.6pt>
File: IMG_0138.jpg Graphic file (type jpg)
<use IMG_0138.jpg>
<IMG_0147.jpg, id=139, 722.7pt x 963.6pt>
File: IMG_0147.jpg Graphic file (type jpg)
<use IMG_0147.jpg> [26 <./Del4.png> <./IMG_0138.jpg>] <IMG_0141.jpg, id=144, 7
22.7pt x 963.6pt>
File: IMG_0141.jpg Graphic file (type jpg)
<use IMG_0141.jpg>
<IMG_0149.jpg, id=145, 722.7pt x 963.6pt>
File: IMG_0149.jpg Graphic file (type jpg)
<use IMG_0149.jpg> [27 <./IMG_0147.jpg> <./IMG_0141.jpg>] <IMG_0140.jpg, id=14
9, 963.6pt x 722.7pt>
File: IMG_0140.jpg Graphic file (type jpg)
<use IMG_0140.jpg> <IMG_0139.jpg, id=150, 963.6pt x 722.7pt>
File: IMG_0139.jpg Graphic file (type jpg)
<use IMG_0139.jpg> [28 <./IMG_0149.jpg> <./IMG_0140.jpg>]
<IMG_0136.jpg, id=154, 963.6pt x 722.7pt>
File: IMG_0136.jpg Graphic file (type jpg)
<use IMG_0136.jpg>
<IMG_0148.jpg, id=155, 722.7pt x 963.6pt>
File: IMG_0148.jpg Graphic file (type jpg)
<use IMG_0148.jpg> [29 <./IMG_0139.jpg> <./IMG_0136.jpg>] <IMG_0135.jpg, id=15
9, 722.7pt x 963.6pt>
File: IMG_0135.jpg Graphic file (type jpg)
<use IMG_0135.jpg> <IMG_0137.jpg, id=160, 722.7pt x 963.6pt>
File: IMG_0137.jpg Graphic file (type jpg)
<use IMG_0137.jpg> [30 <./IMG_0148.jpg> <./IMG_0135.jpg>]
<IMG_0145.jpg, id=165, 722.7pt x 963.6pt>
File: IMG_0145.jpg Graphic file (type jpg)
<use IMG_0145.jpg> [31 <./IMG_0137.jpg>] <vanding.jpg, id=169, 446.41782pt x 4
51.6875pt>
File: vanding.jpg Graphic file (type jpg)
<use vanding.jpg> [32 <./IMG_0145.jpg>] [33 <./vanding.jpg>]
Kapitel 3.
[34
]
Kapitel 4.
! Misplaced alignment tab character &.
l.683 ...i 200 B-niveau, Helge Mygind og P.Haase &
Søns Forlag AS, 1995.
I can't figure out why you would want to use a tab mark
here. If you just want an ampersand, the remedy is
simple: Just type `I\&' now. But if some right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
Overfull \hbox (132.63994pt too wide) in paragraph at lines 690--692
[]$\T1/lmtt/m/n/12 http : / / www . denstoredanske . dk / Krop ,[] _psyke _ og
_ sundhed / Sundhedsvidenskab / Fysiologi /
[]
Overfull \hbox (16.04988pt too wide) in paragraph at lines 692--693
[]$\T1/lmtt/m/n/12 http : / / www . plantetorvet . dk / Haveudstyr / regnvandso
psamling . html$
[]
Overfull \hbox (17.77748pt too wide) in paragraph at lines 693--694
[]$\T1/lmtt/m/n/12 http : / / www . data360 . org / dsg . aspx ? Data _ Set _ G
roup _ Id = 757$ \T1/lmr/m/n/12 (-20) (24.08.11)
[]
Overfull \hbox (30.75238pt too wide) in paragraph at lines 694--696
[]$\T1/lmtt/m/n/12 http : / / www . towards-[]sustainability . co . uk / articl
es / rainharvesting .
[]
Overfull \hbox (5.25987pt too wide) in paragraph at lines 696--697
[]$\T1/lmtt/m/n/12 http : / / www . save-[]the-[]rain . com / world-[]bank/$ \T
1/lmr/m/n/12 (-20) (25.08.11) - Regn-vands-
[]
[35
]
Overfull \hbox (24.07738pt too wide) in paragraph at lines 698--700
[]$\T1/lmtt/m/n/12 http : / / viden . jp . dk / klima / destinationer / kina /
reportager / default .
[]
Overfull \hbox (42.7499pt too wide) in paragraph at lines 700--702
[]$\T1/lmtt/m/n/12 http : / / ing . dk / artikel / 72303-[]vandkoeling-[]skal-[
]afloese-[]aircondition$
[]
Overfull \hbox (30.13449pt too wide) in paragraph at lines 702--703
[]$\T1/lmtt/m/n/12 http : / / www . goenergi . dk / forbruger / huset / indekli
ma / koling$ \T1/lmr/m/n/12 (-20) (22.08.11)
[]
Overfull \hbox (2.46487pt too wide) in paragraph at lines 703--705
[]$\T1/lmtt/m/n/12 http : / / www . facstaff . bucknell . edu / mvigeant / ther
m _ 1 / AC _ final /
[]
[36] (./Rapport Vand.aux) )
Here is how much of TeX's memory you used:
7182 strings out of 493747
109872 string characters out of 3143546
203226 words of memory out of 3000000
10136 multiletter control sequences out of 15000+200000
97343 words of font info for 129 fonts, out of 3000000 for 9000
714 hyphenation exceptions out of 8191
49i,19n,59p,2214b,347s stack positions out of 5000i,500n,10000p,200000b,50000s
{/usr/local/texlive/2010/texmf-dist/fonts/enc/dvips/
lm/lm-ec.enc}{/usr/local/texlive/2010/texmf-dist/fonts/enc/dvips/lm/lm-mathex.e
nc}{/usr/local/texlive/2010/texmf-dist/fonts/enc/dvips/lm/lm-rm.enc}{/usr/local
/texlive/2010/texmf-dist/fonts/enc/dvips/lm/lm-mathit.enc}{/usr/local/texlive/2
010/texmf-dist/fonts/enc/dvips/lm/lm-mathsy.enc}{/usr/local/texlive/2010/texmf-
dist/fonts/enc/dvips/lm/lm-ts1.enc}</usr/local/texlive/2010/texmf-dist/fonts/ty
pe1/public/lm/lmbx10.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public
/lm/lmbx12.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmbx8.
pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmbxi10.pfb></usr
/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmex10.pfb></usr/local/tex
live/2010/texmf-dist/fonts/type1/public/lm/lmmi12.pfb></usr/local/texlive/2010/
texmf-dist/fonts/type1/public/lm/lmmi7.pfb></usr/local/texlive/2010/texmf-dist/
fonts/type1/public/lm/lmmi8.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1
/public/lm/lmr10.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/
lmr12.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmr6.pfb></
usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmr7.pfb></usr/local/te
xlive/2010/texmf-dist/fonts/type1/public/lm/lmr8.pfb></usr/local/texlive/2010/t
exmf-dist/fonts/type1/public/lm/lmri12.pfb></usr/local/texlive/2010/texmf-dist/
fonts/type1/public/lm/lmss17.pfb></usr/local/texlive/2010/texmf-dist/fonts/type
1/public/lm/lmsy10.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/l
m/lmsy6.pfb></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmsy8.pfb
></usr/local/texlive/2010/texmf-dist/fonts/type1/public/lm/lmtt10.pfb></usr/loc
al/texlive/2010/texmf-dist/fonts/type1/public/lm/lmtt12.pfb>
Output written on "Rapport Vand.pdf" (37 pages, 4380975 bytes).
PDF statistics:
262 PDF objects out of 1000 (max. 8388607)
163 compressed objects within 2 object streams
0 named destinations out of 1000 (max. 500000)
27287 words of extra memory for PDF output out of 29859 (max. 10000000)

I hope someone can make some sense of this and point out the problem. Thanks in advance.

[Stefan Kottwitz]

Hi,

this preamble doesn't produce such a problem. I tested it with a chapter and a section, the table of contents is fine.

There are errors in your log file caused by lines you did not post. Please post a complete but minimal example, which shows the problem when compiling. Otherwise you hide code which contains the error and we cannot help. Note, you don't need to post your document text, just reduce a copy as much as possible, as long as it produces the error.

See: What is a minimal working example.

Stefan

[MrJeMo11]

Hi Stefan.

I have deleted the most of the body text and I am still having the error codes.

The document is as follows:

Code: Select all

\documentclass[12pt,danish,a4paper]{report}
\usepackage[hang,bf,small]{caption}
\usepackage[T1]{fontenc} 
\usepackage[danish]{babel}
\usepackage[utf8]{inputenc}
\usepackage{
t1enc,
fancyhdr,
booktabs,
graphicx,
lmodern,
babel,
ulem,
microtype,
breakcites,
mhchem,
mathtools,
textcomp,
float,
url,
remreset
}
\makeatletter
\@removefromreset{footnote}{chapter}
\renewcommand\paragraph{
   \@startsection{paragraph}{4}{0mm}
      {-\baselineskip}
      {.5\baselineskip}
      {\normalfont\normalsize\bfseries}}
\makeatother

\begin{document}

\title{\Huge \vskip-8cm \textsf {Vand}}
\maketitle
\thispagestyle{empty} 

\newpage

\thispagestyle{empty} 
\hspace{6cm} \vspace{6cm}
\begin{center}
\textbf{\Huge {Vand}\\ \vspace{1cm}
\huge{Regnvand}}
\end{center}
\vspace{2cm}
\begin{center}
\textbf{Layout er i henhold til Aalborg Universitets standard i brugen af \LaTeX}
\end{center}
\vspace{3cm}
Projekt nummer 7\\
Under vejledning af\\
Frh. HTX\\
\today
\thispagestyle{empty}

\newpage

\thispagestyle{empty}

\tableofcontents

\newpage

\chapter{Projektbeskrivelse}

\section{Problemanalyse}

\subsection{Klimadata - Jesper}

Ved et projekt om regnvand er det relevant at finde aktuelle klimadata for forskellige byer over det meste af jorden. Klimadataene ses på \textit{figur}.

\begin{figure} [H]
\caption{Klimadata for storbyer over det meste af jorden - Nicki}
\begin{tabular}{|l|lll|}
\hline
&Gns. mnd. regn&Gns. dagtemp.&Gns. nattetemp.
\\ \hline
\textbf{USA:}&&&
\\ \hline
New York&$ \approx$ 89 [mm]&16,25 [\textdegree C]&8,5 [\textdegree C]
\\ \hline
Washington D.C.&$\approx$ 81,8 [mm]&19,5 [\textdegree C]&9,5 [\textdegree C]
\\ \hline
San Francisco& $\approx$ 42 [mm]& $\approx$ 18 [\textdegree C]&$ \approx$ 9 [\textdegree C]
\\ \hline
Chicago&$\approx$ 75,8 [mm] &14,75 [\textdegree C]&$\approx$4,2 [\textdegree C]
\\ \hline
Mexico City&$\approx$ 70-71 [mm]&$ \approx$ 23,6 [\textdegree C]&$ \approx$ 10 [\textdegree C]
\\ \hline \hline
\textbf{Mellem og Sydamerika:}&&&
\\ \hline
San José (Costa Rica)&$\approx$ 164 [mm]&21,5 [\textdegree C]&$ \approx$ 13 [\textdegree C]
\\ \hline \hline
\textbf{Asien:}&&&
\\ \hline
Hong kong&$\approx$ 184,6 [mm]&25,75 [\textdegree C]&20,9 [\textdegree C]
\\ \hline
Tokyo&117,2 [mm]&19,6 [\textdegree C]&12 [\textdegree C]
\\ \hline
Beijing&48,2 [mm]&17,6 [\textdegree C]&6,4 [\textdegree C]
\\ \hline
New Delhi&65,8 [mm]&31,5 [\textdegree C]&19,1 [\textdegree C]
\\ \hline \hline
\textbf{Afrika:}&&&
\\ \hline
Cairo&2,2 [mm]&15,8 [\textdegree C]&7,75 [\textdegree C]
\\ \hline
Kuwait&9 [mm]&32,75 [\textdegree C]&18,75 [\textdegree C]
\\ \hline \hline
\textbf{Europa:}&&&
\\ \hline
Rom&52,8 [mm]&20,4 [\textdegree C]&10,6 [\textdegree C]
\\ \hline
Paris&54,2 [mm]&15,1 [\textdegree C]&6,6 [\textdegree C]
\\ \hline
Budapest&43 [mm]&14,9 [\textdegree C]&6,3 [\textdegree C]
\\ \hline
Berlin&49,25 [mm]&13 [\textdegree C]&5 [\textdegree C]
\\ \hline
Madrid&32 [mm]&20,6 [\textdegree C]&6,9 [\textdegree C]
\\ \hline
\end{tabular}
\label{fig:Klima}
\end{figure} \footnote{\url{http://www.dmi.dk/} (21.08.11)}

Heraf bemærkes det at dataene varierer meget alt efter hvor på jorden man befinder sig. I San José i Costa Rica regner det gennemsnitligt 165 [mm] per måned mens det i mens det i Cairo i Egypten gennemsnitligt regner 2,2 [mm] per måned.

\subsection{Vands egenskaber - Jesper}
\subsubsection{Dissociation \footnote{Kemi 2000 B-Niveau af Helge Mygind}}
$H_{2}O$, vand, er en dipol. Så selvom vand er elektrisk neutralt, har det to positivt ladede ender og en negativt ladet ende. Det er illustreret på \textit{figur}. Vand har noget kaldet autoprotolyse: \medskip \newline 
\ce{H2O + H2O \leftrightarrow H_{3}O ^{+} + OH^{-}} \medskip \newline
Det er det, der gør, at vand er en amfolyt. Dvs. at vand er i stand til både at virke som syre og som base. Netop derfor kan vand reagere med ioner. Dissociation er et udtryk for, hvor godt en syre eller en base reagerer med vand. Hvis et salt dissocierer i vand, spaltes det til de ioner, det består af: anionerne og kationerne. Det er dissociation, der dermed tillader fældningsreaktioner. For uden dissociation ville tilstandsformen vandig opløsning (aq) ikke findes.

\subsubsection{Den konstante fordampning \footnote{An examination of the concept of potential evaporation af R.J. Granger} - Jesper}
Langt de fleste har oplevet den kulde der kommer efter et regnvejr. Luften føles kold. Det skyldes primært en konstant fordampning der sker af det vand der lige er kommet fra regnvejret. 
\medskip \newline
For at vand skal fordampe skal det opnå en temperatur på 100 [°C]. Det skyldes at det kræver en høj energi for vandmolekylerne at frigøre sig fra den elektriske tiltrækning der er mellem vandmolekylerne. Den elektriske tiltrækning er endnu et resultat af at vand er en amfolyt. At vand alligevel kan fordampe ved eksempelvis 20 [°C] skyldes at vandets temperatur er den gennemsnitlige temperatur for alle de enkelte vandmolekyler. På den måde er der mange af vandmolekylerne der er $\leq$ 100 [°C] og der er også mange der er $\geq$ 0 [°C]. Vandmolekylerne kan få tilført energi fra mange ting. Energien kan blive tilført fra stråling, lys men oftest de materialer der omgiver dem. På den måde tager vand varme fra sine omgivelser når det skifter tilstandform. Den mængde energi vandet tager fra sine omgivelser ses på \textit{figur}. Der ses samtidig den mængde energi det kræver at opvarme 1 [kg] vand 1 [°C]. Det kaldes også den specifikke varmekapacitet.

\begin{figure}[H]
\centering
\caption{Specifik fordampningsvarme}
\begin{tabular}{|ll|c|c|}
\hline
Stof&&Specifik fordampningsvarme &Specifik varmekapacitet \\
&&\textit{$L_f$} i [$\frac{kJ}{kg}$]&\textit{c} i [$\frac{J}{kg*^{\circ}C}$] \\ \hline \hline
Vand&\ce{H2O}&2260&4180 \\
Ethanol&\ce{CH3CH2OH}&840&2430 \\ \hline
\end{tabular} 
\label{fig:c}
\end{figure}\footnote{Orbit B$_{htx}$ af Per Holck, Jens Kraaer og Birgitte Merci Lund}

Et simpelt eksempel kan opsættes ved at sige at vi har 1 [kg] vand der er 20 [°C]. Der fordamper fuldstændig efter et tidsrum. Hvor meget energi har vandet taget fra sine omgivelser? Løsningen ses på \textit{ligning}.

\begin{equation}
Q=1 [kg]*4180 [\frac{J}{kg*^{\circ}C}] * (100[^{\circ}C]-20 [^{\circ}C]) + \frac{2260 [J]}{1 [kg]} = \uuline{336660 [J]}
\label{fig:reg}
\end{equation}

Dermed tager 1 [kg] vand ved 20 [°C] 336,66 [kJ] fra sine omgivelser ved komplet fordampning. Det er også denne kølemetode en stor del af dyreriget benytter til at blive effektivt afkølet - gennem det at svede \footnote{\url{http://www.denstoredanske.dk/Krop,_psyke_og_sundhed/Sundhedsvidenskab/Fysiologi/sved} (25.08.11)}. 

\subsection{Opsamling af regnvand - Jeppe}
Verden er i miljøkrise, vores konstante befolkningstilvækst kræver konstant større mængder vand, og drikkeligt ferskvand er i forvejen en begrænset ressource.
Regnvandsopsamling er en langtidsholdbar løsning, der både mindsker \ce{CO2} udslip og forbrug af jordens begrænsede resurser.\footnote{\url{http://www.plantetorvet.dk/Haveudstyr/regnvandsopsamling.html} (24.08.11)}
Gennemsnitligt bruger en amerikaner 575L per dag \footnote{\url{http://www.data360.org/dsg.aspx?Data_Set_Group_Id=757} (24.08.11)} hvor af 46\% eller 264,5 [L] bliver brugt til toilet, vaskemaskine og havevanding\footnote{\url{http://www.towards-sustainability.co.uk/articles/rainharvesting.html} (25.08.11)}. 
Det er sandsynligt at regnen vil falde mere i korte og kraftige regnskyl, der forsager erosion. Når regnen falder på den måde bliver der heller ikke optaget lige så meget i jorden og mere flyder bare væk. Det ville man også delvist hindre ved at opsamle noget af vandet og opbevare det til senere.
Med en regnvandsopsamler  er det muligt at få gratis \ce{CO2} neutralt vand der på ingen forurener eller belaster miljøet.\footnote{\url{http://www.save-the-rain.com/world-bank/} (25.08.11)}

\subsection{Den asiatiske trussel for miljøet - Jesper}
Finanskrisen er over os. Den globale økonomi er under recession. Sådan lyder en stor del af nyhederne vi får i dag. Men det er ikke den fulde sandhed for finanskrisen har næsten ikke ramt Asien. Asien og især Kina er under stor vækst. Siden 2003 har Kina haft årlige vækstrater på over 10 procent i BNP\footnote{\url{http://www.b.dk/verden/fortsat-stor-vaekst-i-kina} (21.08.11)}. Den økonomiske vækst i Kina er så kraftig at udledningen af drivhusgasser fra kinesiske biler, kraftværker og industrivirksomheder om få år vil være større end amerikanernes. I Kina oplever man ofte strømudfald fordi de Kinesiske kraftværker ikke kan levere strøm til det konstant stigende forbrug af elektriske apparater. \textit{"Således skyldtes 40 pct. af væksten i energiforbruget i Shanghai øget brug af aircondition"} forklarer Barbara Finamore der er direktør for det amerikanske China Clean Energi Projekt. Problemerne med at levere strøm nok er så store, at den kinesiske regering overvejer at lægge en dæmper på væksten\footnote{\url{http://viden.jp.dk/klima/destinationer/kina/reportager/default.asp?cid=124884} (21.08.11)}. \textit{"Men myndighederne er helt klar over problemet og de nationale konsekvenser, hvis det ikke lykkes at få økonomien til at vokse uden at øge energiforbruget tilsvarende. Så vil det få alvorlig indflydelse på luftforureningen, landbrugsproduktionen, den voksende mængde sur regn og ikke mindst befolkningens sundhed. Verdensbanken antager, at forurening fra den stigende energiproduktion alene i dag har så stor indflydelse på befolkningens sundhed, at det koster Kina 7 pct. af landets BNP. Derfor er regeringen klar over, at noget skal gøres"} 
\subsection{Aircondition - Jesper}

Som det blev beskrevet i foregående afsnit er airconditions blandt de mest energikrævende elektriske apparater vi har. \textit{"Airconditionanlæg bruger faktisk så meget energi, at de i praksis vil være umulige at benytte i nye byggerier med de EU-energikrav, der er trådt i kraft i foråret"} siger civilingeniør, ph.d. Peter Weitzmann fra Danmarks Tekniske Universitet (DTU)\footnote{\url{http://ing.dk/artikel/72303-vandkoeling-skal-afloese-aircondition} (21.08.11)}. Den offentlige organisation \textit{Go' Energi} udtrykker følgende: \textit{"Aircondition bruger store mængder strøm, og du bør derfor så vidt muligt tænke i andre metoder, når din bolig skal afkøles så miljøvenligt som muligt."} \footnote{\url{http://www.goenergi.dk/forbruger/huset/indeklima/koling} (22.08.11)}

\newpage

\subsubsection{Airconditionens opbygning \footnote{Ingen kilde kunne findes om airconditionens opbygning. Dermed ingen tekst}}

Airconditionens opbygning ses på \textit{figur}.

\subsubsection{Airconditionens historie \footnote{\url{http://www.facstaff.bucknell.edu/mvigeant/therm_1/AC_final/bg.htm} (23.08.11)}}

\paragraph{År $\approx$1000 fkr. - $\approx$0}
I det gamle Rom er den første form for aircondition set. Den bestod i at vand løb gennem murene for derved at afkøle dem. Det meste af kølingen lå i vandets fordamning fra murene. Tilsvarende køling er også set i Persiske bygninger fra middelalderen.

\paragraph{År 200}
I løbet af år 200 opfandt den kinesiske opfinder Ding Huane en propel der var 3 [m] i diameter og havde 7 blade. Den blev roteret manuelt.

\paragraph{År 1758}


\paragraph{År 1902}
I år 1902 opfandt Willis Haviland Carrier den første elektriske aircondition der fungerede som en moderne aircondition. Herfra tog udviklingen fat.

\section{Problemformulering - Alle tre}

\begin{itemize}
\item Hvordan kan man nemt og billigt producere et produkt, som kan hjælpe med at løse problemet med rumafkøling?
\item Hvordan kan vi minimere brugen af energi på rumafkøling?
\item Hvordan kan man nedsætte materialeforbruget til dette produkt uden at påvirke produktets funktionalitet?
\end{itemize}

\section{Tidsplan - Jeppe}
 \textit{figur}.

\section{Projektafgrænsning - Jesper}

\chapter{Hovedafsnit}

\section{Produktudvikling}

\subsection*{Første del - Jesper}
 $[\frac{cm^2}{cm^3}]$ \textit{figur}.\textit{figur \ref{fig:PV}} 

\begin{figure}[H]
\centering
\caption{PV-skema over materialevalg [0;10]}
\begin{tabular}{|l|l|l|l|l|l|c|}
\hline
&[$\frac{cm^2}{cm^3}$]&Realistisk&Tek. indhold&Holdbarhed&I alt: \\
Vægtning&10&10&8&7& \\ \hline \hline

Sten&5&10&3&10&\\ 
&50&50&24&70&194 \\ \hline
Sandstøbning&9&8&8&9&\\ 
&90&80&64&63&\textbf{297} \\\hline
Keramisk materiale&10&4&8&9&\\ 
&100&40&64&63&267 \\ \hline
Beton&9&7&7&8&\\ 
&90&70&56&56&272 \\ \hline
Cement&9&8&7&5&\\ 
&90&80&56&35&261 \\ \hline
Brugte mursten&6&9&3&8&\\ 
&60&90&24&56&230 \\ \hline
Svampe&9&9&1&7&\\ 
&90&90&8&49&237 \\ \hline
Filtre&8&6&4&7&\\ 
&80&60&32&49&221 \\ \hline
\end{tabular}
\label{fig:PV}
\end{figure}

På baggrund af den ulempe vurderede vi at elementerne ikke må kunne indeholde vand men at det skal ligge på overfladen. \\
Dernæst skulle vi beslutte formen af hele konstruktionen. 
\medskip

\subsubsection*{- Jeppe}
 \textit{figur} 

\textit{Figur}

\paragraph*{Indvendigt mønster til \textit{figur}} 

\textit{Figur}

\textit{Figur} 
\textit{Figur} \textit{figur} \textit{figur} \textit{figur} 

\subsubsection*{- Jesper}

\begin{itemize}
\item Tom kerne. Vi kan lave en tom metal - eller plastskal hvorpå sandet limes.
\item Trækerne. Træ har en ret lav varmekapacitet.
\item Skumkerne. Skum har en lav varmekapacitet. 
\item Ingen kerne. Vi kan fjerne halvdelen af begge legemer og lave dem i metal så de slet ingen kerne har. Ideen er illustreret på \textit{figur}.
\end{itemize}

\textit{figur}

\begin{figure} [H]
\leftskip-0.65cm
\caption{PV-skema over kernevalg [0;5]}
\begin{tabular}{|l|l|l|l|l|l|l|}
\hline
&Holdbarhed&Varmekapacitet&Udførlighed&Luftflow&Pris&I alt \\
Vægtning&4&5&4&3&3& \\ 
\hline
Tom kerne&5&5&3&5&4& \\
&20&25&12&15&12&84 \\
\hline
Trækerne&2&3&4&5&4& \\
&8&15&16&15&12&66 \\
\hline
Skumkerne&5&4&4&5&2& \\
&20&20&16&15&6&77 \\
\hline
Ingen kerne&5&5&5&3&4& \\
&20&25&20&9&12&\textbf{89} \\
\hline
\end{tabular}
\label{fig:PV1}
\end{figure}

 \textit{figur}

\paragraph*{Luftkølerens længde - Jeppe}

\footnote{Orbit B$_{htx}$ }

\paragraph*{Afstandsstykker - Jeppe}

\subsection{Opsummering - Jeppe}

\paragraph*{Materiale:} 

\paragraph*{Design:} 

\paragraph*{Materiale revidering:} 

\paragraph*{Kerne:} 

\textit{Derfor vil vores produkt foreløbigt blive \textit{figur} udført i hule metaldele, sprøjtet med lim og sand.}

\newpage

\subsection*{Anden del}

\subsubsection*{Beregning af størrelse på delene - Jesper}

\begin{equation}
6^2 [cm]+1,5^2 [cm]=x^2 [cm] 
\end{equation}

\begin{equation}
x=\sqrt{6^2 [cm]+1,5^2 [cm]}=6,18 [cm]
\end{equation}


\begin{equation}
\frac{2*6 [cm]*\pi}{2*6,18 [cm]*\pi}*100*3,60=349,25 [^{\circ}]
\end{equation}
 $[^{\circ}]$ 

\begin{equation}
|\frac{1,5 [cm]}{6 [cm]}|=0,25
\end{equation}

\begin{equation}
5 [cm]*0,25 [cm] *2 = 2,5 [cm] 
\end{equation}

\begin{equation}
5^2 [cm]+1,125^2 [cm]=x^2 [cm] 
\end{equation}

\begin{equation}
x=\sqrt{5^2 [cm]+1,125^2 [cm]}= 5,125 [cm]
\end{equation}

\begin{equation}
7,5^2 [cm]+(7,5*0,25)^2 [cm]=x^2 [cm] 
\end{equation}

\begin{equation}
x=\sqrt{7,5^2 [cm]+(7,5*0,25)^2 [cm]}= 7,73 [cm]
\end{equation}

$7,73 [cm] - 5,125 [cm] = 2,605 [cm]$  $11 [^{\circ}]$.

\subsubsection*{Den tekniske tegning - Nicki}

\subsubsection*{Revideret ide - Jesper}

\subsubsection*{Værkstedsarbejde - Jeppe}

\subsubsection*{Hypotetisk færdiggørelse af produkt - Jeppe og Jesper}

\paragraph*{Affugtning af luft}

\subsubsection*{Materialevalg til røret - Jeppe}

Røret til airconditionen er af materialet PVC(polyvinylchlorid) som indeholder grundstoffet chlor. Når PVC skal afskaffes bliver det gjort ved afbrænding og i den proces bliver der frigivet chlor ud i luften. 
Den kemiske afbrænding ser sådan ud: \medskip \newline
\ce{C2H3Cl + O2 -> CO2+H2O+Cl2} \medskip \newline
Når $Cl_2$ kommer ud i luften binder den sig til vand og bliver til saltsyre og hypoclorsyrling
Den kemiske reaktion ser sådan ud: \medskip \newline
\ce{Cl2 + H2O <=>  HClO + HCl} \medskip \newline
\chapter{Konklusion}

\chapter{Litteraturliste - Nicki}

\subsection*{Bøger:}
\begin{itemize}
\item Madsen, Preben, Pedersen, Bøje, Kromann, Christian, Frandsen, Kirsten, Wesnæs, Marianne, Schultz, Ole, Steffensen, Peder: Teknologi HTX-Grundbog: Erhvervsskolernes Forlag, 1998.
\item Mygind, Helge: Kemi 200 B-niveau, Helge Mygind og P.Haase & Søns Forlag AS, 1995.
\item Holck, Per, Kraaer, Jens, Lund, Merci, Birgitte: Orbit Bhtx: Morten Brydensholt, Tommy Gjøe, Per Holck, Lis Jespersen, Ole Keller, Jens Kraaer, Birgitte Merci Lund, Jan Møller, Jens Vaaben og Systime A/S, 2005.
\end{itemize}

\subsection*{Internetkilder:}
\begin{itemize}
\item \url{http://www.dmi.dk/} (21.08.11) - Klimadata
\item \url{http://www.denstoredanske.dk/Krop,_psyke_og_sundhed/Sundhedsvidenskab/
Fysiologi/sved} (25.08.11) - Køling af menneskets krop ved hjælp af sved
\item \url{http://www.plantetorvet.dk/Haveudstyr/regnvandsopsamling.html} (24.08.11) - Viden om regnvandsopsamling
\item \url{http://www.data360.org/dsg.aspx?Data_Set_Group_Id=757} (24.08.11) - Vandforbrug
\item \url{http://www.towards-sustainability.co.uk/articles/rainharvesting.html}
(25.08.11) - Regnvandsopsamling
\item \url{http://www.save-the-rain.com/world-bank/} (25.08.11) - Regnvandsopsamling
\item \url{http://www.b.dk/verden/fortsat-stor-vaekst-i-kina} (21.08.11) - Vækst i Kina
\item \url{http://viden.jp.dk/klima/destinationer/kina/reportager/default.asp?
cid=124884} (21.08.11) - Kineserne overtager den Vestlige Verdens dårlige energivaner
\item \url{http://ing.dk/artikel/72303-vandkoeling-skal-afloese-aircondition}
(21.08.11) - Vandkøling
\item \url{http://www.goenergi.dk/forbruger/huset/indeklima/koling} (22.08.11) - Råd til at undgå energispild
\item \url{http://www.facstaff.bucknell.edu/mvigeant/therm_1/AC_final/bg.htm}
(23.08.11) - Airconditionens historie
\end{itemize}

\subsection*{Mundtlige kilder til inspiration:}

\end{document}

Thank you very much for helping me

/ Jesper

[localghost]

[…] I have deleted the most of the body text and I am still having the error codes. […]

And I'm sure that you can delete much more with the errors still persisting.


Best regards and welcome to the board
Thorsten

[MrJeMo11]

Okay. Thank you very much. I have a hard time understanding "What is a minimal working example" is about but is the idea that I am supposed to continue deleting from the document until the error disappears? I am generally new to coding and programming and so on so those kinds of manuals are difficult to understand but if I have understood the essential parts right you has been a great help

\Jesper

[localghost]

[…] I have a hard time understanding "What is a minimal working example" is about but is the idea that I am supposed to continue deleting from the document until the error disappears? […]

This is exactly the intention. You are going to delete code successively until an error disappears. Hence the last deleted piece of code is the culprit. If you are not able to fix the error by yourself, add the last deleted code again and post the example here. Proceed this way with all the errors and you have your minimal example that will enable us to help.

[MrJeMo11]

Thank you for the help. Now I hope I am capable of solving most of the errors that will occur in future