which has the name of the file. However, commenting out
will lead to an empty definition and this 'file' can't be found. I've changed the structure.tex file a little bit and introduced
. (see below)
Code: Select all
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% The Legrand Orange Book
% LaTeX Template
% Version 2.0 (9/2/15)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Mathias Legrand (legrand.mathias@gmail.com) with modifications by:
% Vel (vel@latextemplates.com)
%
% License:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
% Compiling this template:
% This template uses biber for its bibliography and makeindex for its index.
% When you first open the template, compile it from the command line with the
% commands below to make sure your LaTeX distribution is configured correctly:
%
% 1) pdflatex main
% 2) makeindex main.idx -s StyleInd.ist
% 3) biber main
% 4) pdflatex main x 2
%
% After this, when you wish to update the bibliography/index use the appropriate
% command above and make sure to compile with pdflatex several times
% afterwards to propagate your changes to the document.
%
% This template also uses a number of packages which may need to be
% updated to the newest versions for the template to compile. It is strongly
% recommended you update your LaTeX distribution if you have any
% compilation errors.
%
% Important note:
% Chapter heading images should have a 2:1 width:height ratio,
% e.g. 920px width and 460px height.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[11pt,fleqn]{book} % Default font size and left-justified equations
%----------------------------------------------------------------------------------------
\input{structure} % Insert the commands.tex file which contains the majority of the structure behind the template
\begin{document}
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begingroup
\thispagestyle{empty}
\begin{tikzpicture}[remember picture,overlay]
\coordinate [below=12cm] (midpoint) at (current page.north);
\node at (current page.north west)
{\begin{tikzpicture}[remember picture,overlay]
\node[anchor=north west,inner sep=0pt] at (0,0) {\includegraphics[width=\paperwidth]{background}}; % Background image
\draw[anchor=north] (midpoint) node [fill=ocre!30!white,fill opacity=0.6,text opacity=1,inner sep=1cm]{\Huge\centering\bfseries\sffamily\parbox[c][][t]{\paperwidth}{\centering The Search for a Title\\[15pt] % Book title
{\Large A Profound Subtitle}\\[20pt] % Subtitle
{\huge Dr. John Smith}}}; % Author name
\end{tikzpicture}};
\end{tikzpicture}
\vfill
\endgroup
%----------------------------------------------------------------------------------------
% COPYRIGHT PAGE
%----------------------------------------------------------------------------------------
\newpage
~\vfill
\thispagestyle{empty}
\noindent Copyright \copyright\ 2013 John Smith\\ % Copyright notice
\noindent \textsc{Published by Publisher}\\ % Publisher
\noindent \textsc{book-website.com}\\ % URL
\noindent Licensed under the Creative Commons Attribution-NonCommercial 3.0 Unported License (the ``License''). You may not use this file except in compliance with the License. You may obtain a copy of the License at \url{http://creativecommons.org/licenses/by-nc/3.0}. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an \textsc{``as is'' basis, without warranties or conditions of any kind}, either express or implied. See the License for the specific language governing permissions and limitations under the License.\\ % License information
\noindent \textit{First printing, March 2013} % Printing/edition date
%----------------------------------------------------------------------------------------
% TABLE OF CONTENTS
%----------------------------------------------------------------------------------------
\usechapterimagetrue
\chapterimage{chapter_head_1.pdf} % Table of contents heading image
\pagestyle{empty} % No headers
\tableofcontents % Print the table of contents itself
\cleardoublepage % Forces the first chapter to start on an odd page so it's on the right
\pagestyle{fancy} % Print headers again
%----------------------------------------------------------------------------------------
% PART
%----------------------------------------------------------------------------------------
\part{Part One}
%----------------------------------------------------------------------------------------
% CHAPTER 1
%----------------------------------------------------------------------------------------
\chapterimage{chapter_head_2.pdf} % Chapter heading image
\chapter{Text Chapter}
\section{Paragraphs of Text}\index{Paragraphs of Text}
\lipsum[1-7] % Dummy text
%------------------------------------------------
\section{Citation}\index{Citation}
This statement requires citation \cite{book_key}; this one is more specific \cite[122]{article_key}.
%------------------------------------------------
\section{Lists}\index{Lists}
Lists are useful to present information in a concise and/or ordered way\footnote{Footnote example...}.
\subsection{Numbered List}\index{Lists!Numbered List}
\begin{enumerate}
\item The first item
\item The second item
\item The third item
\end{enumerate}
\subsection{Bullet Points}\index{Lists!Bullet Points}
\begin{itemize}
\item The first item
\item The second item
\item The third item
\end{itemize}
\subsection{Descriptions and Definitions}\index{Lists!Descriptions and Definitions}
\begin{description}
\item[Name] Description
\item[Word] Definition
\item[Comment] Elaboration
\end{description}
%----------------------------------------------------------------------------------------
% CHAPTER 2
%----------------------------------------------------------------------------------------
\chapter{In-text Elements}
\section{Theorems}\index{Theorems}
This is an example of theorems.
\subsection{Several equations}\index{Theorems!Several Equations}
This is a theorem consisting of several equations.
\begin{theorem}[Name of the theorem]
In $E=\mathbb{R}^n$ all norms are equivalent. It has the properties:
\begin{align}
& \big| ||\mathbf{x}|| - ||\mathbf{y}|| \big|\leq || \mathbf{x}- \mathbf{y}||\\
& ||\sum_{i=1}^n\mathbf{x}_i||\leq \sum_{i=1}^n||\mathbf{x}_i||\quad\text{where $n$ is a finite integer}
\end{align}
\end{theorem}
\subsection{Single Line}\index{Theorems!Single Line}
This is a theorem consisting of just one line.
\begin{theorem}
A set $\mathcal{D}(G)$ in dense in $L^2(G)$, $|\cdot|_0$.
\end{theorem}
%------------------------------------------------
\section{Definitions}\index{Definitions}
This is an example of a definition. A definition could be mathematical or it could define a concept.
\begin{definition}[Definition name]
Given a vector space $E$, a norm on $E$ is an application, denoted $||\cdot||$, $E$ in $\mathbb{R}^+=[0,+\infty[$ such that:
\begin{align}
& ||\mathbf{x}||=0\ \Rightarrow\ \mathbf{x}=\mathbf{0}\\
& ||\lambda \mathbf{x}||=|\lambda|\cdot ||\mathbf{x}||\\
& ||\mathbf{x}+\mathbf{y}||\leq ||\mathbf{x}||+||\mathbf{y}||
\end{align}
\end{definition}
%------------------------------------------------
\section{Notations}\index{Notations}
\begin{notation}
Given an open subset $G$ of $\mathbb{R}^n$, the set of functions $\varphi$ are:
\begin{enumerate}
\item Bounded support $G$;
\item Infinitely differentiable;
\end{enumerate}
a vector space is denoted by $\mathcal{D}(G)$.
\end{notation}
%------------------------------------------------
\section{Remarks}\index{Remarks}
This is an example of a remark.
\begin{remark}
The concepts presented here are now in conventional employment in mathematics. Vector spaces are taken over the field $\mathbb{K}=\mathbb{R}$, however, established properties are easily extended to $\mathbb{K}=\mathbb{C}$.
\end{remark}
%------------------------------------------------
\section{Corollaries}\index{Corollaries}
This is an example of a corollary.
\begin{corollary}[Corollary name]
The concepts presented here are now in conventional employment in mathematics. Vector spaces are taken over the field $\mathbb{K}=\mathbb{R}$, however, established properties are easily extended to $\mathbb{K}=\mathbb{C}$.
\end{corollary}
%------------------------------------------------
\section{Propositions}\index{Propositions}
This is an example of propositions.
\subsection{Several equations}\index{Propositions!Several Equations}
\begin{proposition}[Proposition name]
It has the properties:
\begin{align}
& \big| ||\mathbf{x}|| - ||\mathbf{y}|| \big|\leq || \mathbf{x}- \mathbf{y}||\\
& ||\sum_{i=1}^n\mathbf{x}_i||\leq \sum_{i=1}^n||\mathbf{x}_i||\quad\text{where $n$ is a finite integer}
\end{align}
\end{proposition}
\subsection{Single Line}\index{Propositions!Single Line}
\begin{proposition}
Let $f,g\in L^2(G)$; if $\forall \varphi\in\mathcal{D}(G)$, $(f,\varphi)_0=(g,\varphi)_0$ then $f = g$.
\end{proposition}
%------------------------------------------------
\section{Examples}\index{Examples}
This is an example of examples.
\subsection{Equation and Text}\index{Examples!Equation and Text}
\begin{example}
Let $G=\{x\in\mathbb{R}^2:|x|<3\}$ and denoted by: $x^0=(1,1)$; consider the function:
\begin{equation}
f(x)=\left\{\begin{aligned} & \mathrm{e}^{|x|} & & \text{si $|x-x^0|\leq 1/2$}\\
& 0 & & \text{si $|x-x^0|> 1/2$}\end{aligned}\right.
\end{equation}
The function $f$ has bounded support, we can take $A=\{x\in\mathbb{R}^2:|x-x^0|\leq 1/2+\epsilon\}$ for all $\epsilon\in\intoo{0}{5/2-\sqrt{2}}$.
\end{example}
\subsection{Paragraph of Text}\index{Examples!Paragraph of Text}
\begin{example}[Example name]
\lipsum[2]
\end{example}
%------------------------------------------------
\section{Exercises}\index{Exercises}
This is an example of an exercise.
\begin{exercise}
This is a good place to ask a question to test learning progress or further cement ideas into students' minds.
\end{exercise}
%------------------------------------------------
\section{Problems}\index{Problems}
\begin{problem}
What is the average airspeed velocity of an unladen swallow?
\end{problem}
%------------------------------------------------
\section{Vocabulary}\index{Vocabulary}
Define a word to improve a students' vocabulary.
\begin{vocabulary}[Word]
Definition of word.
\end{vocabulary}
%----------------------------------------------------------------------------------------
% PART
%----------------------------------------------------------------------------------------
\part{Part Two}
%----------------------------------------------------------------------------------------
% CHAPTER 3
%----------------------------------------------------------------------------------------
\chapterimage{chapter_head_1.pdf} % Chapter heading image
\chapter{Presenting Information}
\section{Table}\index{Table}
\begin{table}[h]
\centering
\begin{tabular}{l l l}
\toprule
\textbf{Treatments} & \textbf{Response 1} & \textbf{Response 2}\\
\midrule
Treatment 1 & 0.0003262 & 0.562 \\
Treatment 2 & 0.0015681 & 0.910 \\
Treatment 3 & 0.0009271 & 0.296 \\
\bottomrule
\end{tabular}
\caption{Table caption}
\end{table}
%------------------------------------------------
\section{Figure}\index{Figure}
\begin{figure}[h]
\centering\includegraphics[scale=0.5]{placeholder}
\caption{Figure caption}
\end{figure}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\chapter*{Bibliography}
\addcontentsline{toc}{chapter}{\textcolor{ocre}{Bibliography}}
\section*{Books}
\addcontentsline{toc}{section}{Books}
\printbibliography[heading=bibempty,type=book]
\section*{Articles}
\addcontentsline{toc}{section}{Articles}
\printbibliography[heading=bibempty,type=article]
%----------------------------------------------------------------------------------------
% INDEX
%----------------------------------------------------------------------------------------
\cleardoublepage
\phantomsection
\setlength{\columnsep}{0.75cm}
\addcontentsline{toc}{chapter}{\textcolor{ocre}{Index}}
\printindex
%----------------------------------------------------------------------------------------
\end{document}
Code: Select all
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Changed to disable the \chapterimage
% The Legrand Orange Book
% Structural Definitions File
% Version 2.0 (9/2/15)
%
% Original author:
% Mathias Legrand (legrand.mathias@gmail.com) with modifications by:
% Vel (vel@latextemplates.com)
%
% This file has been downloaded from:
% http://www.LaTeXTemplates.com
%
% License:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% VARIOUS REQUIRED PACKAGES AND CONFIGURATIONS
%----------------------------------------------------------------------------------------
\usepackage[top=3cm,bottom=3cm,left=3cm,right=3cm,headsep=10pt,a4paper]{geometry} % Page margins
\usepackage{graphicx} % Required for including pictures
\graphicspath{{Pictures/}} % Specifies the directory where pictures are stored
\usepackage{lipsum} % Inserts dummy text
\usepackage{tikz} % Required for drawing custom shapes
\usepackage[english]{babel} % English language/hyphenation
\usepackage{enumitem} % Customize lists
\setlist{nolistsep} % Reduce spacing between bullet points and numbered lists
\usepackage{booktabs} % Required for nicer horizontal rules in tables
\usepackage{xcolor} % Required for specifying colors by name
\definecolor{ocre}{RGB}{243,102,25} % Define the orange color used for highlighting throughout the book
%----------------------------------------------------------------------------------------
% FONTS
%----------------------------------------------------------------------------------------
\usepackage{avant} % Use the Avantgarde font for headings
%\usepackage{times} % Use the Times font for headings
\usepackage{mathptmx} % Use the Adobe Times Roman as the default text font together with math symbols from the Symbol, Chancery and Computer Modern fonts
\usepackage{microtype} % Slightly tweak font spacing for aesthetics
\usepackage[utf8]{inputenc} % Required for including letters with accents
\usepackage[T1]{fontenc} % Use 8-bit encoding that has 256 glyphs
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY AND INDEX
%----------------------------------------------------------------------------------------
\usepackage[style=alphabetic,citestyle=numeric,sorting=nyt,sortcites=true,autopunct=true,babel=hyphen,hyperref=true,abbreviate=false,backref=true,backend=biber]{biblatex}
\addbibresource{bibliography.bib} % BibTeX bibliography file
\defbibheading{bibempty}{}
\usepackage{calc} % For simpler calculation - used for spacing the index letter headings correctly
\usepackage{makeidx} % Required to make an index
\makeindex % Tells LaTeX to create the files required for indexing
%----------------------------------------------------------------------------------------
% MAIN TABLE OF CONTENTS
%----------------------------------------------------------------------------------------
\usepackage{titletoc} % Required for manipulating the table of contents
\contentsmargin{0cm} % Removes the default margin
% Part text styling
\titlecontents{part}[0cm]
{\addvspace{20pt}\centering\large\bfseries}
{}
{}
{}
% Chapter text styling
\titlecontents{chapter}[1.25cm] % Indentation
{\addvspace{12pt}\large\sffamily\bfseries} % Spacing and font options for chapters
{\color{ocre!60}\contentslabel[\Large\thecontentslabel]{1.25cm}\color{ocre}} % Chapter number
{\color{ocre}}
{\color{ocre!60}\normalsize\;\titlerule*[.5pc]{.}\;\thecontentspage} % Page number
% Section text styling
\titlecontents{section}[1.25cm] % Indentation
{\addvspace{3pt}\sffamily\bfseries} % Spacing and font options for sections
{\contentslabel[\thecontentslabel]{1.25cm}} % Section number
{}
{\hfill\color{black}\thecontentspage} % Page number
[]
% Subsection text styling
\titlecontents{subsection}[1.25cm] % Indentation
{\addvspace{1pt}\sffamily\small} % Spacing and font options for subsections
{\contentslabel[\thecontentslabel]{1.25cm}} % Subsection number
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} % Page number
[]
% List of figures
\titlecontents{figure}[0em]
{\addvspace{-5pt}\sffamily}
{\thecontentslabel\hspace*{1em}}
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage}
[]
% List of tables
\titlecontents{table}[0em]
{\addvspace{-5pt}\sffamily}
{\thecontentslabel\hspace*{1em}}
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage}
[]
%----------------------------------------------------------------------------------------
% MINI TABLE OF CONTENTS IN PART HEADS
%----------------------------------------------------------------------------------------
% Chapter text styling
\titlecontents{lchapter}[0em] % Indenting
{\addvspace{15pt}\large\sffamily\bfseries} % Spacing and font options for chapters
{\color{ocre}\contentslabel[\Large\thecontentslabel]{1.25cm}\color{ocre}} % Chapter number
{}
{\color{ocre}\normalsize\sffamily\bfseries\;\titlerule*[.5pc]{.}\;\thecontentspage} % Page number
% Section text styling
\titlecontents{lsection}[0em] % Indenting
{\sffamily\small} % Spacing and font options for sections
{\contentslabel[\thecontentslabel]{1.25cm}} % Section number
{}
{}
% Subsection text styling
\titlecontents{lsubsection}[.5em] % Indentation
{\normalfont\footnotesize\sffamily} % Font settings
{}
{}
{}
%----------------------------------------------------------------------------------------
% PAGE HEADERS
%----------------------------------------------------------------------------------------
\usepackage{fancyhdr} % Required for header and footer configuration
\pagestyle{fancy}
\renewcommand{\chaptermark}[1]{\markboth{\sffamily\normalsize\bfseries\chaptername\ \thechapter.\ #1}{}} % Chapter text font settings
\renewcommand{\sectionmark}[1]{\markright{\sffamily\normalsize\thesection\hspace{5pt}#1}{}} % Section text font settings
\fancyhf{} \fancyhead[LE,RO]{\sffamily\normalsize\thepage} % Font setting for the page number in the header
\fancyhead[LO]{\rightmark} % Print the nearest section name on the left side of odd pages
\fancyhead[RE]{\leftmark} % Print the current chapter name on the right side of even pages
\renewcommand{\headrulewidth}{0.5pt} % Width of the rule under the header
\addtolength{\headheight}{2.5pt} % Increase the spacing around the header slightly
\renewcommand{\footrulewidth}{0pt} % Removes the rule in the footer
\fancypagestyle{plain}{\fancyhead{}\renewcommand{\headrulewidth}{0pt}} % Style for when a plain pagestyle is specified
% Removes the header from odd empty pages at the end of chapters
\makeatletter
\renewcommand{\cleardoublepage}{
\clearpage\ifodd\c@page\else
\hbox{}
\vspace*{\fill}
\thispagestyle{empty}
\newpage
\fi}
%----------------------------------------------------------------------------------------
% THEOREM STYLES
%----------------------------------------------------------------------------------------
\usepackage{amsmath,amsfonts,amssymb,amsthm} % For math equations, theorems, symbols, etc
\newcommand{\intoo}[2]{\mathopen{]}#1\,;#2\mathclose{[}}
\newcommand{\ud}{\mathop{\mathrm{{}d}}\mathopen{}}
\newcommand{\intff}[2]{\mathopen{[}#1\,;#2\mathclose{]}}
\newtheorem{notation}{Notation}[chapter]
% Boxed/framed environments
\newtheoremstyle{ocrenumbox}% % Theorem style name
{0pt}% Space above
{0pt}% Space below
{\normalfont}% % Body font
{}% Indent amount
{\small\bf\sffamily\color{ocre}}% % Theorem head font
{\;}% Punctuation after theorem head
{0.25em}% Space after theorem head
{\small\sffamily\color{ocre}\thmname{#1}\nobreakspace\thmnumber{\@ifnotempty{#1}{}\@upn{#2}}% Theorem text (e.g. Theorem 2.1)
\thmnote{\nobreakspace\the\thm@notefont\sffamily\bfseries\color{black}---\nobreakspace#3.}} % Optional theorem note
\renewcommand{\qedsymbol}{$\blacksquare$}% Optional qed square
\newtheoremstyle{blacknumex}% Theorem style name
{5pt}% Space above
{5pt}% Space below
{\normalfont}% Body font
{} % Indent amount
{\small\bf\sffamily}% Theorem head font
{\;}% Punctuation after theorem head
{0.25em}% Space after theorem head
{\small\sffamily{\tiny\ensuremath{\blacksquare}}\nobreakspace\thmname{#1}\nobreakspace\thmnumber{\@ifnotempty{#1}{}\@upn{#2}}% Theorem text (e.g. Theorem 2.1)
\thmnote{\nobreakspace\the\thm@notefont\sffamily\bfseries---\nobreakspace#3.}}% Optional theorem note
\newtheoremstyle{blacknumbox} % Theorem style name
{0pt}% Space above
{0pt}% Space below
{\normalfont}% Body font
{}% Indent amount
{\small\bf\sffamily}% Theorem head font
{\;}% Punctuation after theorem head
{0.25em}% Space after theorem head
{\small\sffamily\thmname{#1}\nobreakspace\thmnumber{\@ifnotempty{#1}{}\@upn{#2}}% Theorem text (e.g. Theorem 2.1)
\thmnote{\nobreakspace\the\thm@notefont\sffamily\bfseries---\nobreakspace#3.}}% Optional theorem note
% Non-boxed/non-framed environments
\newtheoremstyle{ocrenum}% % Theorem style name
{5pt}% Space above
{5pt}% Space below
{\normalfont}% % Body font
{}% Indent amount
{\small\bf\sffamily\color{ocre}}% % Theorem head font
{\;}% Punctuation after theorem head
{0.25em}% Space after theorem head
{\small\sffamily\color{ocre}\thmname{#1}\nobreakspace\thmnumber{\@ifnotempty{#1}{}\@upn{#2}}% Theorem text (e.g. Theorem 2.1)
\thmnote{\nobreakspace\the\thm@notefont\sffamily\bfseries\color{black}---\nobreakspace#3.}} % Optional theorem note
\renewcommand{\qedsymbol}{$\blacksquare$}% Optional qed square
\makeatother
% Defines the theorem text style for each type of theorem to one of the three styles above
\newcounter{dummy}
\numberwithin{dummy}{section}
\theoremstyle{ocrenumbox}
\newtheorem{theoremeT}[dummy]{Theorem}
\newtheorem{problem}{Problem}[chapter]
\newtheorem{exerciseT}{Exercise}[chapter]
\theoremstyle{blacknumex}
\newtheorem{exampleT}{Example}[chapter]
\theoremstyle{blacknumbox}
\newtheorem{vocabulary}{Vocabulary}[chapter]
\newtheorem{definitionT}{Definition}[section]
\newtheorem{corollaryT}[dummy]{Corollary}
\theoremstyle{ocrenum}
\newtheorem{proposition}[dummy]{Proposition}
%----------------------------------------------------------------------------------------
% DEFINITION OF COLORED BOXES
%----------------------------------------------------------------------------------------
\RequirePackage[framemethod=default]{mdframed} % Required for creating the theorem, definition, exercise and corollary boxes
% Theorem box
\newmdenv[skipabove=7pt,
skipbelow=7pt,
backgroundcolor=black!5,
linecolor=ocre,
innerleftmargin=5pt,
innerrightmargin=5pt,
innertopmargin=5pt,
leftmargin=0cm,
rightmargin=0cm,
innerbottommargin=5pt]{tBox}
% Exercise box
\newmdenv[skipabove=7pt,
skipbelow=7pt,
rightline=false,
leftline=true,
topline=false,
bottomline=false,
backgroundcolor=ocre!10,
linecolor=ocre,
innerleftmargin=5pt,
innerrightmargin=5pt,
innertopmargin=5pt,
innerbottommargin=5pt,
leftmargin=0cm,
rightmargin=0cm,
linewidth=4pt]{eBox}
% Definition box
\newmdenv[skipabove=7pt,
skipbelow=7pt,
rightline=false,
leftline=true,
topline=false,
bottomline=false,
linecolor=ocre,
innerleftmargin=5pt,
innerrightmargin=5pt,
innertopmargin=0pt,
leftmargin=0cm,
rightmargin=0cm,
linewidth=4pt,
innerbottommargin=0pt]{dBox}
% Corollary box
\newmdenv[skipabove=7pt,
skipbelow=7pt,
rightline=false,
leftline=true,
topline=false,
bottomline=false,
linecolor=gray,
backgroundcolor=black!5,
innerleftmargin=5pt,
innerrightmargin=5pt,
innertopmargin=5pt,
leftmargin=0cm,
rightmargin=0cm,
linewidth=4pt,
innerbottommargin=5pt]{cBox}
% Creates an environment for each type of theorem and assigns it a theorem text style from the "Theorem Styles" section above and a colored box from above
\newenvironment{theorem}{\begin{tBox}\begin{theoremeT}}{\end{theoremeT}\end{tBox}}
\newenvironment{exercise}{\begin{eBox}\begin{exerciseT}}{\hfill{\color{ocre}\tiny\ensuremath{\blacksquare}}\end{exerciseT}\end{eBox}}
\newenvironment{definition}{\begin{dBox}\begin{definitionT}}{\end{definitionT}\end{dBox}}
\newenvironment{example}{\begin{exampleT}}{\hfill{\tiny\ensuremath{\blacksquare}}\end{exampleT}}
\newenvironment{corollary}{\begin{cBox}\begin{corollaryT}}{\end{corollaryT}\end{cBox}}
%----------------------------------------------------------------------------------------
% REMARK ENVIRONMENT
%----------------------------------------------------------------------------------------
\newenvironment{remark}{\par\vspace{10pt}\small % Vertical white space above the remark and smaller font size
\begin{list}{}{
\leftmargin=35pt % Indentation on the left
\rightmargin=25pt}\item\ignorespaces % Indentation on the right
\makebox[-2.5pt]{\begin{tikzpicture}[overlay]
\node[draw=ocre!60,line width=1pt,circle,fill=ocre!25,font=\sffamily\bfseries,inner sep=2pt,outer sep=0pt] at (-15pt,0pt){\textcolor{ocre}{R}};\end{tikzpicture}} % Orange R in a circle
\advance\baselineskip -1pt}{\end{list}\vskip5pt} % Tighter line spacing and white space after remark
%----------------------------------------------------------------------------------------
% SECTION NUMBERING IN THE MARGIN
%----------------------------------------------------------------------------------------
\makeatletter
\renewcommand{\@seccntformat}[1]{\llap{\textcolor{ocre}{\csname the#1\endcsname}\hspace{1em}}}
\renewcommand{\section}{\@startsection{section}{1}{\z@}
{-4ex \@plus -1ex \@minus -.4ex}
{1ex \@plus.2ex }
{\normalfont\large\sffamily\bfseries}}
\renewcommand{\subsection}{\@startsection {subsection}{2}{\z@}
{-3ex \@plus -0.1ex \@minus -.4ex}
{0.5ex \@plus.2ex }
{\normalfont\sffamily\bfseries}}
\renewcommand{\subsubsection}{\@startsection {subsubsection}{3}{\z@}
{-2ex \@plus -0.1ex \@minus -.2ex}
{.2ex \@plus.2ex }
{\normalfont\small\sffamily\bfseries}}
\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}
{-2ex \@plus-.2ex \@minus .2ex}
{.1ex}
{\normalfont\small\sffamily\bfseries}}
%----------------------------------------------------------------------------------------
% PART HEADINGS
%----------------------------------------------------------------------------------------
% numbered part in the table of contents
\newcommand{\@mypartnumtocformat}[2]{%
\setlength\fboxsep{0pt}%
\noindent\colorbox{ocre!20}{\strut\parbox[c][.7cm]{\ecart}{\color{ocre!70}\Large\sffamily\bfseries\centering#1}}\hskip\esp\colorbox{ocre!40}{\strut\parbox[c][.7cm]{\linewidth-\ecart-\esp}{\Large\sffamily\centering#2}}}%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% unnumbered part in the table of contents
\newcommand{\@myparttocformat}[1]{%
\setlength\fboxsep{0pt}%
\noindent\colorbox{ocre!40}{\strut\parbox[c][.7cm]{\linewidth}{\Large\sffamily\centering#1}}}%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newlength\esp
\setlength\esp{4pt}
\newlength\ecart
\setlength\ecart{1.2cm-\esp}
\newcommand{\thepartimage}{}%
\newcommand{\partimage}[1]{\renewcommand{\thepartimage}{#1}}%
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >-2\relax%
\refstepcounter{part}%
\addcontentsline{toc}{part}{\texorpdfstring{\protect\@mypartnumtocformat{\thepart}{#1}}{\partname~\thepart\ ---\ #1}}
\else%
\addcontentsline{toc}{part}{\texorpdfstring{\protect\@myparttocformat{#1}}{#1}}%
\fi%
\startcontents%
\markboth{}{}%
{\thispagestyle{empty}%
\begin{tikzpicture}[remember picture,overlay]%
\node at (current page.north west){\begin{tikzpicture}[remember picture,overlay]%
\fill[ocre!20](0cm,0cm) rectangle (\paperwidth,-\paperheight);
\node[anchor=north] at (4cm,-3.25cm){\color{ocre!40}\fontsize{220}{100}\sffamily\bfseries\@Roman\c@part};
\node[anchor=south east] at (\paperwidth-1cm,-\paperheight+1cm){\parbox[t][][t]{8.5cm}{
\printcontents{l}{0}{\setcounter{tocdepth}{1}}%
}};
\node[anchor=north east] at (\paperwidth-1.5cm,-3.25cm){\parbox[t][][t]{15cm}{\strut\raggedleft\color{white}\fontsize{30}{30}\sffamily\bfseries#2}};
\end{tikzpicture}};
\end{tikzpicture}}%
\@endpart}
\def\@spart#1{%
\startcontents%
\phantomsection
{\thispagestyle{empty}%
\begin{tikzpicture}[remember picture,overlay]%
\node at (current page.north west){\begin{tikzpicture}[remember picture,overlay]%
\fill[ocre!20](0cm,0cm) rectangle (\paperwidth,-\paperheight);
\node[anchor=north east] at (\paperwidth-1.5cm,-3.25cm){\parbox[t][][t]{15cm}{\strut\raggedleft\color{white}\fontsize{30}{30}\sffamily\bfseries#1}};
\end{tikzpicture}};
\end{tikzpicture}}
\addcontentsline{toc}{part}{\texorpdfstring{%
\setlength\fboxsep{0pt}%
\noindent\protect\colorbox{ocre!40}{\strut\protect\parbox[c][.7cm]{\linewidth}{\Large\sffamily\protect\centering #1\quad\mbox{}}}}{#1}}%
\@endpart}
\def\@endpart{\vfil\newpage
\if@twoside
\if@openright
\null
\thispagestyle{empty}%
\newpage
\fi
\fi
\if@tempswa
\twocolumn
\fi}
%----------------------------------------------------------------------------------------
% CHAPTER HEADINGS
%----------------------------------------------------------------------------------------
\newif\ifusechapterimage
\usechapterimagefalse
\newcommand{\thechapterimage}{}%
\newcommand{\chapterimage}[1]{\ifusechapterimage\renewcommand{\thechapterimage}{#1}\fi}%
\def\@makechapterhead#1{%
{\parindent \z@ \raggedright \normalfont
\ifnum \c@secnumdepth >\m@ne
\if@mainmatter
\begin{tikzpicture}[remember picture,overlay]
\node at (current page.north west)
{\begin{tikzpicture}[remember picture,overlay]
\node[anchor=north west,inner sep=0pt] at (0,0) {\ifusechapterimage\includegraphics[width=\paperwidth]{\thechapterimage}\fi};
\draw[anchor=west] (\Gm@lmargin,-9cm) node [line width=2pt,rounded corners=15pt,draw=ocre,fill=white,fill opacity=0.5,inner sep=15pt]{\strut\makebox[22cm]{}};
\draw[anchor=west] (\Gm@lmargin+.3cm,-9cm) node {\huge\sffamily\bfseries\color{black}\thechapter. #1\strut};
\end{tikzpicture}};
\end{tikzpicture}
\else
\begin{tikzpicture}[remember picture,overlay]
\node at (current page.north west)
{\begin{tikzpicture}[remember picture,overlay]
\node[anchor=north west,inner sep=0pt] at (0,0) {\ifusechapterimage\includegraphics[width=\paperwidth]{\thechapterimage}\fi};
\draw[anchor=west] (\Gm@lmargin,-9cm) node [line width=2pt,rounded corners=15pt,draw=ocre,fill=white,fill opacity=0.5,inner sep=15pt]{\strut\makebox[22cm]{}};
\draw[anchor=west] (\Gm@lmargin+.3cm,-9cm) node {\huge\sffamily\bfseries\color{black}#1\strut};
\end{tikzpicture}};
\end{tikzpicture}
\fi\fi\par\vspace*{270\p@}}}
%-------------------------------------------
\def\@makeschapterhead#1{%
\begin{tikzpicture}[remember picture,overlay]
\node at (current page.north west)
{\begin{tikzpicture}[remember picture,overlay]
\node[anchor=north west,inner sep=0pt] at (0,0) {\ifusechapterimage\includegraphics[width=\paperwidth]{\thechapterimage}\fi};
\draw[anchor=west] (\Gm@lmargin,-9cm) node [line width=2pt,rounded corners=15pt,draw=ocre,fill=white,fill opacity=0.5,inner sep=15pt]{\strut\makebox[22cm]{}};
\draw[anchor=west] (\Gm@lmargin+.3cm,-9cm) node {\huge\sffamily\bfseries\color{black}#1\strut};
\end{tikzpicture}};
\end{tikzpicture}
\par\vspace*{270\p@}}
\makeatother
%----------------------------------------------------------------------------------------
% HYPERLINKS IN THE DOCUMENTS
%----------------------------------------------------------------------------------------
\usepackage{hyperref}
\hypersetup{hidelinks,backref=true,pagebackref=true,hyperindex=true,colorlinks=false,breaklinks=true,urlcolor= ocre,bookmarks=true,bookmarksopen=false,pdftitle={Title},pdfauthor={Author}}
\usepackage{bookmark}
\bookmarksetup{
open,
numbered,
addtohook={%
\ifnum\bookmarkget{level}=0 % chapter
\bookmarksetup{bold}%
\fi
\ifnum\bookmarkget{level}=-1 % part
\bookmarksetup{color=ocre,bold}%
\fi
}
}
