I'm having trouble with the placement of my figures. I want to have a section, then two separate pages for my figures, then the next section.
As it is, it is making the first section, a bit of the second, then the two pages figures, then the
rest of the second section. the following is my code:
btw, it is just the eps that I want on two separate pages.
Code: Select all
\section*{Processed data}
The following is the processed data of the stopw data set. The two XsClass files that give different read outs for the muon channel for the BHMU data sets do not affect the MC data. Though I have yet to sort this out, the MC is unaffected by this. Where I have used the BHMU data set, it is with the old XsClass set, as with the new one the cuts applied to the muon channel, also affect the electron channel. As the electron channel is fine with the old XsClass, I have decided to use this for reference to any readings.
The acceptance tables are only for the njet = 1 channel however in calculations I have included the njet = 2 channel unless otherwise stated.
I was unsure whether to use stage 13 (taggable) or stage 14 (SLT taggable) for the calculations of the acceptance value. I have done several calculations with both.
\begin{table}[ht]
\begin{center}
\begin{tabular}{lc|cccc}
\hline
\hline
& stopw0 & stopw1 & stopw2 & stopw3 \\
\hline
Stage 0 &844538 & 742955 &359850 & 113949 \\
Stage 1 & 800515 & 719699 & 350308 &111259 \\
Stage 2 & 290133 & 303012 &158057 &51927 \\
Stage 3 & 200606 & 264562 & 144643 &48212 \\
Stage 4 & 130616 & 174007 &95037 &31603 \\
Stage 5 & 113930 & 164624 & 91133 &30494 \\
Stage 6 & 113893 & 164566 &91078 & 30469 \\
Stage 7 & 113369 & 163439 &90205 & 30099 \\
Stage 8 & 105283 & 160556 & 89442 &29938 \\
Stage 9 & 105273 &160537 &89432 & 29938 \\
Stage 10 & 105273& 160537 &89432 & 29938 \\
Stage 11 & 105273& 160537 &89432 &29938 \\
Stage 12 & 105269 & 160527& 89427 &29936 \\
Stage 13 & 62879 & 91963 &52790 & 18222 \\
Stage 14 & 2293 & 1932 & 984 &319 \\
Background&534.709 &789.976 &474.648 &174.910 \\
\hline
\end{tabular}
\end{center}
\caption{Acceptance table of the njet = 1 MC dataset stopw0 - stopw3}
\label{tab:ftest}
\end{table}
\newpage
\begin{table}[ht]
\begin{center}
\begin{tabular}{lc|cccc}
\hline
\hline
& stopw5 & stopw6 & stopw7 & stopw8 \\
\hline
Stage 0 &664167 & 918577 &493247 & 140491 \\
Stage 1 &636639 & 880015 & 471987 & 133852 \\
Stage 2 & 114441 & 167302 &92962 & 27282 \\
Stage 3 & 106355 & 156865 & 87259 & 25586 \\
Stage 4 &59616 & 94423 &53046 & 15553 \\
Stage 5 & 57271 &89934 &49969 & 14356 \\
Stage 6 &57262 & 89906 &49941 & 14343 \\
Stage 7 & 57094 &89543 &49688 & 14268 \\
Stage 8 &57094 & 89543 & 49688 & 14268 \\
Stage 9 & 57093 &89530 &49687 & 14266 \\
Stage 10 &57093 & 89530 &49687 & 14266 \\
Stage 11 &57093 & 89530 &49687 & 14266 \\
Stage 12 & 56993 &89424 & 49646 & 14248 \\
Stage 13 & 33438 &50477 &28603 & 8491 \\
Stage 14 & 1132 & 957 & 511 & 116 \\
Background&278.529 & 423.852 & 250.814 & 79.285 \\
\hline
\end{tabular}
\end{center}
\caption{Acceptance table of the CMUP njet = 1 MC dataset stopw5 - stopw8}
\label{tab:ftest}
\end{table}
\vspace*{0.5cm}
\begin{table}[ht]
\begin{center}
\begin{tabular}{lc|cccc}
\hline
\hline
& stopw5 & stopw6 & stopw7 & stopw8 \\
\hline
Stage 0 &664167 & 918577 &493247 & 140491 \\
Stage 1 & 629754 & 870463 &466747 & 132038 \\
Stage 2 &62718 & 88336 &47987 & 13780 \\
Stage 3 & 58004 &82537 & 44720 & 12824 \\
Stage 4 & 32299 & 48948 &26709 & 7662 \\
Stage 5 &31154 & 46805 &25261 & 7155 \\
Stage 6 &31147 &46786 &25248 &7149 \\
Stage 7 &31043 & 46606 &25116 & 7100 \\
Stage 8 & 31043 &46606 &25116 & 7100 \\
Stage 9 & 31041 & 46599 &25112 & 7099 \\
Stage 10 &31041 &46599 &25112 & 7099 \\
Stage 11 &31041 &46599 &25112 & 7099 \\
Stage 12 & 30995 &46553 & 25087 & 7093 \\
Stage 13 & 18280 &26280 &14500 & 4243 \\
Stage 14 & 593 & 488 & 240 & 82 \\
Background&152.923 & 220.075 & 128.337 & 39.670 \\
\hline
\end{tabular}
\end{center}
\caption{Acceptance table of the CMX njet = 1 MC dataset stopw5 - stopw8}
\label{tab:ftest}
\end{table}
\newpage
\begin{figure}[pt]
\begin{center}
\begin{tabular}{cc}
\includegraphics[width=8cm]{mc20_1_0_TLpt.eps} &
\includegraphics[width=8cm]{mc20_1_0_met.eps} \\
(a) Momentum of TL (SLT=0) & (b) Missing transverse (energy SLT=0) \\
\includegraphics[width=8cm]{mc20_1_1_TLpt.eps} &
\includegraphics[width=8cm]{mc20_1_1_met.eps} \\
(c) Momentum of TL (SLT=1) & (d) Missing transverse (energy SLT=1) \\
\end{tabular}
\end{center}
\caption{{\small Momentum of SLT from the BHEL data }}
\label{fig:zmm_ed}
\end{figure}
\newpage
\begin{figure}[pt]
\begin{center}
\begin{tabular}{cc}
\includegraphics[width=8cm]{mc20_1_1_pt.eps} &
\includegraphics[width=8cm]{mc20_1_1_os.eps} \\
(a) Momentum of SLT & (b) OS momentum of SLT \\
\includegraphics[width=8cm]{mc20_1_1_ss.eps} &
\includegraphics[width=8cm]{mc20_1_1_os-ss.eps} \\
(c) SS momentum of SLT & (d) OS-SS momentum of SLT \\
\end{tabular}
\end{center}
\caption{{\small Momentum of SLT from the BHEL data }}
\label{fig:zmm_ed}
\end{figure}
\pagebreak
\newpage
\section*{Calculations of the acceptance value}
The following are the different methods of calculation of the acceptance value. These include a few examlpes of those that are of good values and those that are of bad values.
\subsection{Calculation 1}
Method
