I hope somebody will be willing to help. I tried many solutions but none is working
. For some reason the footer in my document only appear on the first page. I want it on every page. What am I doing wrong?Thank
Pieter
Code: Select all
\documentclass[8pt,a4paper,twoside]{report}
\usepackage[headsep=1.5cm, left=1.00cm, right=1.00cm, top=3.00cm, bottom=1.5cm]{geometry}
%-------------------------------------------
%header and footer
\usepackage{fancyhdr}
\pagestyle{fancy}
\fancyhf{}
\fancyhead[LE,LO]{{\Large PHENOSOLVAN WEST AND AMMONIA RECOVERY} \\ {\large Inspection log: Area 3}}
\fancyhead[RE,RO]{ \includegraphics[width=1.5cm]{../../Images/sasolog}}
\fancyfoot[LE,LO]{Rersion: 1}
\fancyfoot[CE,CO]{\thepage\ of \pageref{LastPage}}
\fancyfoot[RE,RO]{Reference: \textbf{SAS--422}}
\renewcommand{\headrulewidth}{1pt}
\renewcommand{\footrulewidth}{0.4pt}
%-------------------------------------------
%\usepackage[latin1]{inputenc}
\usepackage{amsmath}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{titlesec}
\usepackage{array}% http://ctan.org/pkg/array
\usepackage[framemethod=tikz]{mdframed}
\usepackage{tikz}
\usetikzlibrary{fit}
\usepackage[bf]{caption}
\usepackage{colortbl}
\usepackage{arydshln}
\usepackage{makecell}
\usepackage{rotating}
\usepackage{tabu}
\usepackage{array}
\usepackage{booktabs}
\usepackage{fontspec}
\setmainfont{Arial}
\usepackage{lastpage}
\usepackage{extramarks}
\usepackage{vhistory}
\usepackage{hyperref}
\usepackage{wasysym}
\usepackage{amssymb}
\usepackage{chemformula}
\usepackage{boldline}
\usepackage{draftwatermark}\SetWatermarkText{DRAFT}
%-------------------------------------------
%Spacing below sections
\titlespacing*{\section}
{0pt}{0ex}{.4ex}
\titlespacing*{\subsection}
{0pt}{0ex}{0ex}
\titlespacing*{\subsubsection}
{0pt}{0ex}{0ex}
%-------------------------------------------
%Removing leading 0's
\renewcommand{\thesection}{\arabic{section}}
\renewcommand{\arraystretch}{1.2}
%-------------------------------------------
%Commands for cunstom signature fields
\newcommand{\titledate}[3][5cm]{%
\noindent%
\begin{tabular}{@{}p{#1}@{}}
\\ \makebox[.3\columnwidth]{\dotfill}\\ \\[-.75\normalbaselineskip]
\vspace{.2cm}
\hspace{1cm} \textbf{PC}
\end{tabular} \hspace{1cm}
\begin{tabular}{@{}p{#1}@{}}
\\ \makebox[.3\columnwidth]{\dotfill}\\ \\[-.75\normalbaselineskip]
\vspace{.2cm}
\hspace{1cm} \textbf{OSPC}
\end{tabular} \hspace{1cm}
\begin{tabular}{@{}p{#1}@{}}
\\ \makebox[.3\columnwidth]{\dotfill}\\ \\[-.75\normalbaselineskip]
\vspace{.2cm}
\hspace{1cm} \textbf{Group Leader}
\end{tabular}
}
\definecolor{mycolor}{rgb}{0,0,0}
\newmdenv[innerlinewidth=0.5pt, roundcorner=4pt,linecolor=mycolor,innerleftmargin=6pt,
innerrightmargin=6pt,innertopmargin=6pt,innerbottommargin=6pt]{mybox}
%-------------------------------------------
%Command for history
\newcommand{\docTitle}{Inspection log Area 3}
\hypersetup{%
pdftitle = {\docTitle},
pdfkeywords = {\docTitle, Rersion: \vhCurrentVersion,
Date: \vhCurrentDate},
pdfauthor = {\vhAllAuthorsSet}
}
\author{Pieter J van Zyl}
\title{\docTitle}
%-------------------------------------------
%Command for table headers and content
\newcommand{\mtheadl}[2]{\makebox[#1]{\makecell[l]{\textbf{#2}}}} %left aligned
\newcommand{\mtheadc}[2]{\makebox[#1]{\makecell[c]{\textbf{#2}}}} %centre aligned
\newcommand{\mtheadr}[2]{\makebox[#1]{\makecell[r]{\textbf{#2}}}} %right aligned
%Command for rownumbers
\newcounter{magicrownumbers}
\newcommand{\rownumber}{\stepcounter{magicrownumbers}\arabic{magicrownumbers}}
%-------------------------------------------
%Document starts here
\begin{document}
%Main inspection page
\section{Inspection log}
\begin{center}
\textbf{Note}: This inspection log is to be given to the Production Foreman at the first shift meeting of the day. If any deviation has been noted, please give detail on the opposite side of this page, for example, if, point 5 is an issue then on the opposite side of this page, note under the \textbf{Point/Equipment} column , 5, then give a short description why point 5 is a issue. If there you have orange tag numbers / notification numbers then note them down.
\end{center}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}
{l|c|c V{5} c|l}
\makebox[9.55cm]{\textbf{Name}} & \makebox[3cm]{\textbf{CNo}} & \makebox[3cm]{\textbf{Date}}& \multicolumn{2}{c}{\makebox[2cm]{\textbf{Shift}}} \\ \Xhline{1\arrayrulewidth}
& & &\makebox[.4cm]{\sun} & Day\\
\cline{4-5}
& & &\makebox[.4cm]{\leftmoon} & Night \\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
%controll space between tabels
\vspace{-1.5em}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{c V{5} l V{5} c|c}
\mtheadc{1cm}{Point} & \mtheadl{15.5cm}{Question} & \multicolumn{2}{c}{Answer} \\\Xhline{5\arrayrulewidth}
\rownumber & Is your radio in a working condition and battery charged? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Is you PPE in good order and without defects? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Was the area given over to you in a clean and sound condition? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are all the vehicle entrance gates closed on this area? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are there enough sample bottles available for your samples? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Do you have enough sample cards for samples? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Is the barricading neat and to standard on this area? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are \textbf{ALL} BA's and fire extinguishers present and sealed in boxes? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are \textbf{ALL} fireboxes sealed in you area? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the emergency showers and eye baths in a working condition? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Have you picked up and tested the \textbf{ALL} emergency phones on this area? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Did you find any defects on the emergency phones? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are there Any leaks on this area? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are all pumps ready for operation? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Did you inspect all the fin fans? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the hoses in a working condition and rolled up on rack provided if not in use? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Is the area free of paper, plastic and debris? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the pump bed plates clean? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the pump gauges working, clean and giving readings? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the level glasses working, clean and giving a level? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Did you wash this area? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the mobile ladders on this area in a safe and working condition? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the mobile ladders, when not used, located in the correct areas? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are there valve spanners available on your area? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the valve spanners at their designated storage poins? & \mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are \textbf{ALL} the sample points working and clean? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Are the tops of 017VL-103 and 017VL-403 frozen? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & Is the load shedding open between the phases? &\mtheadc{.5cm}{Y} & \mtheadl{.5cm}{N} \\\hdashline[.5pt/.5pt]
\rownumber & APS vent is going to Phase & \textbf{1} & \textbf{2} \\[.5ex]\hdashline[.5pt/.5pt]
\rownumber & APS \ch{H2S} water is being drawn from Phase & \textbf{1} & \textbf{2} \\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\newpage
\section{Inspection log feedback from previous page}
\thispagestyle{fancy}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{c|l V{5} c|c}
\mtheadc{3cm}{Point/Equipment} & \mtheadl{9.5cm}{Description} & \mtheadc{2.5cm}{Orange Tag} & \mtheadc{2.5cm}{Notification} \\\Xhline{5\arrayrulewidth}
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]\hdashline[1pt/1pt]
& & & \\[1ex]
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\newpage
\section{Plate heat exchanger status}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{l V{5} c|c|c|c|c|c|c|c|c|c V{5} c|c|c|c|c}
\mtheadl{7.5cm}{Phase 1}& \multicolumn{10}{c V{5} }{017EX-101's} & \multicolumn{5}{c}{017EX-102's} \\
\cline{2-16}
\mtheadl{3cm}{Status:}& \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{D} & \mtheadc{.3cm}{E} & \mtheadc{.3cm}{F} & \mtheadc{.3cm}{G} & \mtheadc{.3cm}{H} & \mtheadc{.3cm}{J} & \mtheadc{.3cm}{K} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{D} & \mtheadc{.3cm}{E} \\\hline \hline
Incommission& & & & & & & & & & & & & &\\ \hline
Spare / De-commissioned & & & & & & & & & & & & & &\\ \hline
C/C& & & & & & & & & & & & & &\\ \hline
Leaking& & & & & & & & & & & & & &\\ \hline
Spools leaking & & & & & & & & & & & & & &\\\hline \hline
\textbf{Phase 2}& \multicolumn{10}{c V{5} }{017EX-401's} & \multicolumn{5}{c}{017EX-402's} \\
\cline{2-16}
\mtheadl{3cm}{Status:}& \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{D} & \mtheadc{.3cm}{E} & \mtheadc{.3cm}{F} & \mtheadc{.3cm}{G} & \mtheadc{.3cm}{H} & \mtheadc{.3cm}{J} & \mtheadc{.3cm}{K} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{D} & \mtheadc{.3cm}{E} \\\hline \hline
Incommission& & & & & & & & & & & & & &\\ \hline
Spare / De-commissioned & & & & & & & & & & & & & &\\ \hline
C/C& & & & & & & & & & & & & &\\ \hline
Leaking& & & & & & & & & & & & & &\\ \hline
Spools leaking & & & & & & & & & & & & & &\\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{l V{5} c|c|c|c|c|c|c|c|c|c|c|c}
\mtheadl{9.5cm}{Phase 1}& \multicolumn{2}{c|}{106} & \multicolumn{2}{c|}{107} & \multicolumn{2}{c|}{108} & 113 & \multicolumn{3}{c|}{116} & \multicolumn{2}{c|}{126} \\
\cline{2-13}
\mtheadl{3cm}{Status:}& \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} \\\hline \hline
In commission& & & & & & & & & & &\\ \hline
Spare / De-commissioned & & & & & & & & & & &\\ \hline
C/C& & & & & & & & & & &\\ \hline
Leaking& & & & & & & & & & &\\ \hline
Spools leaking& & & & & & & & & & &\\ \hline \hline
\textbf{Phase 2}& \multicolumn{2}{c|}{406} & \multicolumn{2}{c|}{407} & \multicolumn{2}{c|}{408} & 113 & \multicolumn{3}{c|}{416} & \multicolumn{2}{c|}{426} \\
\cline{2-13}
\mtheadl{3cm}{Status:}& \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} & \mtheadc{.3cm}{C} & \mtheadc{.3cm}{A} & \mtheadc{.3cm}{B} \\\hline \hline
In commission& & & & & & & & & & &\\ \hline
Spare / De-commissioned& & & & & & & & & & &\\ \hline
C/C& & & & & & & & & & &\\ \hline
Leaking& & & & & & & & & & &\\ \hline
Spools leaking& & & & & & & & & & &\\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\section{Equipment levels}
\begin{table}[th!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt]
{
\begin{tabular}{ p{2.5cm} | p{1cm} | p{1cm} | p{3.4cm} V{5} p{2.5cm} | m{1cm} | p{1cm} | p{3.4cm} }
\textbf{Phase 1} & \textbf{TDC} & \textbf{Plant} & \textbf{Feedback} & \textbf{Phase 2} & \textbf{TDC} & \textbf{Plant} & \textbf{Feedback} \\ \hline \hline
017VL-101 & & & & 017VL-401 & & & \\ \hline
017VL-102 & & & & 017VL-402 & & & \\ \hline
017VL-103 & & & & 017VL-403 & & & \\ \hline
016VL-104 & & & & 017VL-404 & & & \\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\newpage
\section{Pump and motor inspections}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{l V{5} c V{5} c|c V{5} c|c|c|c|c V{5} c|c V{5} c}
&\multicolumn{8}{c}{\mtheadc{6cm}{Phase 1 - 017PC}}\\
\cline{2-12}
\mtheadl{3.8cm}{Question} & \mtheadc{.9cm}{102} & \mtheadc{.9cm}{103A} & \mtheadc{.9cm}{103B}& \mtheadc{.9cm}{104} & \mtheadc{.9cm}{105} & \mtheadc{.9cm}{106} & \mtheadc{.9cm}{107} & \mtheadc{.9cm}{108} & \mtheadc{.9cm}{109A} & \mtheadc{.9cm}{109B} & \mtheadc{.9cm}{120}\\ \hline \hline
\textbf{Discharge pressure} & & & & & & & & & & &\\ \hline \hline
\textbf{Running PC} & & & & & & & & & & &\\ \hline
\textbf{Standby PC} & & & & & & & & & & &\\ \hline
\textbf{Standby PC Auto/Off} & & & & & & & & & & &\\ \hline \hline
\textbf{Gauge working?} & & & & & & & & & & & \\ \hline
\textbf{Oil level OK?} & & & & & & & & & & & \\ \hline
\textbf{Seal fluid open?} & & & & & & & & & & & \\ \hline
\textbf{Any leaks?} & & & & & & & & & & & \\ \hline
\textbf{Any high vibrations?} & & & & & & & & & & & \\ \hline
\textbf{Noisy?} & & & & & & & & & & & \\ \hline \hline
&\multicolumn{7}{c}{\mtheadc{6cm}{Phase 2 - 017PC}}\\
\cline{2-12}
\textbf{Question} & 402 & 403A & 403B & 404 & 405 & 406 & 407 & 408 & 409A & 409B & 420\\ \hline \hline
\textbf{Discharge pressure} & & & & & & & & & & &\\ \hline \hline
\textbf{Running PC} & & & & & & & & & & &\\ \hline
\textbf{Standby PC} & & & & & & & & & & &\\ \hline
\textbf{Standby PC Auto/Off} & & & & & & & & & & &\\ \hline \hline
\textbf{Gauge working?} & & & & & & & & & & & \\ \hline
\textbf{Oil level OK?} & & & & & & & & & & & \\ \hline
\textbf{Seal fluid open?} & & & & & & & & & & & \\ \hline
\textbf{Any leaks?} & & & & & & & & & & & \\ \hline
\textbf{Any high vibrations?} & & & & & & & & & & & \\ \hline
\textbf{Noisy?} & & & & & & & & & & & \\
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\section{BPA and MPA colours}
\begin{table}[h!]
\centering
\begin{tikzpicture}
\node (table) [inner sep=.5pt] {
\begin{tabular}{l V{5} c|c|c|c}
& \multicolumn{4}{c}{\textbf{Colour of PA's}} \\
\cline{2-5}
\mtheadl{9cm}{Pump arounds} & \mtheadc{2cm}{Colourless} & \mtheadc{2cm}{Light Yellow} & \mtheadc{2cm}{Yellow} & \mtheadc{2cm}{Dark Yellow} \\[1ex] \hline \hline
\mtheadl{3cm}{017VL-103 BPA} & & & & \\ \hline
\mtheadl{3cm}{017VL-103 MPA} & & & & \\ \hline \hline
\mtheadl{3cm}{017VL-403 BPA} & & & & \\ \hline
\mtheadl{3cm}{017VL-403 MPA} & & & & \\ \hline
\end{tabular}
};
\draw [rounded corners=.25em,line width=2pt,] (table.north west) rectangle (table.south east);
\end{tikzpicture}
\end{table}
\section{Signatures}
\titledate{}
% Copy doc history here to print
\end{document}
%-------------------------------------------
Document history
% NT - N Taylor
% PZ - Pieter J van Zyl
% MB - Morne Barnard
% BZ - Bafana Zulu
% ES - Ettiene Schonken
\begin{versionhistory}
\docTitle
\vhEntry{1}{10 May 2020}{PZ}{New document}
\vhEntry{1}{14 May 2020}{PZ}{Document accepted}
\end{versionhistory}
%-------------------------------------------
. Problem solved. The problem solution is sooooo simple. It is so true that many times the solution is much simpler than we think.