Document Classes ⇒ Re: Octavo package does not recognise \tableofcontents

[skanda]

Hello Stefan,
Update on the issue. I am sorry in advance about the long log files taking up space in post. I couldn't see a way of embedding it as attachment.

For the update of babel use your package manager. With MiKTeX click Start/ MiKTeX/ Browse Packages, with TeX Live use the tlmgr program.

I uninstalled babel and re-installed again using the package manager

Perhaps you will have to rebuild the format files afterwards, you can find information here: Updating babel.
Stefan

Did this step as well.

Now, I think MikTeX is well and truly broken. When I issue a simple call to build the "mwe.tex" (the one shared later on in this post), I get this log.

Code: Select all

This is pdfTeX, Version 3.1415926-1.40.9 (MiKTeX 2.7)
(Fatal format file error; I'm stymied)

latex.log produces the following:

Code: Select all

This is TeX, Version 3.1415926 (MiKTeX 2.7) (INITEX)  17 MAY 2009 10:33
**latex.ini
("C:\Program Files\MiKTeX 2.7\tex\latex\config\latex.ini"
("C:\Program Files\MiKTeX 2.7\tex\latex\base\latex.ltx"
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\texsys.cfg")
./texsys.aux found


\@currdir set to: ./.


Assuming \openin and \input 
have the same search path.


Defining UNIX/DOS style filename parser.

catcodes, registers,
\maxdimen=\dimen10
\hideskip=\skip10
\p@=\dimen11
\z@=\dimen12
\z@skip=\skip11
\voidb@x=\box10
 compatibility for TeX 2,  parameters,
\normalbaselineskip=\skip12
\normallineskip=\skip13
\normallineskiplimit=\dimen13
\interfootnotelinepenalty=\count23
\strutbox=\box11

LaTeX2e <2005/12/01>
hacks,
\@tempcnta=\count24
\@tempcntb=\count25
\@tempdima=\dimen14
\@tempdimb=\dimen15
\@tempdimc=\dimen16
\@tempboxa=\box12
\@tempskipa=\skip14
\@tempskipb=\skip15
\@temptokena=\toks10
\@flushglue=\skip16
 control, par, spacing,
\@savsk=\dimen17
\@savsf=\count26
\smallskipamount=\skip17
\medskipamount=\skip18
\bigskipamount=\skip19
\fill=\skip20
 files,
\@inputcheck=\read0
\@unused=\write0
\@mainaux=\write1
\@partaux=\write2
\@clubpenalty=\count27
 font encodings, lengths,
\everymath=\toks11
\everydisplay=\toks12
\every@math@size=\toks13
\lower@bound=\dimen18
\upper@bound=\dimen19
\c@mv@normal=\count28
\c@mv@bold=\count29

====================================

Local config file fonttext.cfg used

====================================
("C:\Program Files\MiKTeX 2.7\tex\cslatex\base\fonttext.cfg"
File: fonttext.cfg 1997/08/20 CSLaTeX

("C:\Program Files\MiKTeX 2.7\tex\latex\base\omlenc.def"
File: omlenc.def 2005/09/27 v1.99g Standard LaTeX file
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ot1enc.def"
File: ot1enc.def 2005/09/27 v1.99g Standard LaTeX file
)
("C:\Program Files\MiKTeX 2.7\tex\latex\cslatex\il2enc.def"
File: il2enc.def 1997/08/20 CSLaTeX
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\omsenc.def"
File: omsenc.def 2005/09/27 v1.99g Standard LaTeX file
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1cmr.fd"
File: t1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ot1cmr.fd"
File: ot1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\cslatex\il2cmr.fd"
File: il2cmr.fd 1997/02/06 CSLaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ot1cmss.fd"
File: ot1cmss.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ot1cmtt.fd"
File: ot1cmtt.fd 1999/05/25 v2.5h Standard LaTeX font definitions
))
====================================

Local config file fontmath.cfg used

====================================
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\fontmath.cfg"
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontmath.ltx"
File: fontmath.ltx 2004/02/04 v2.3a LaTeX Kernel (Math font setup)

=== Don't modify this file, use a .cfg file instead ===

LaTeX Font Info:    Redeclaring font encoding OML on input line 59.
LaTeX Font Info:    Redeclaring font encoding OMS on input line 60.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\omlcmm.fd"
File: omlcmm.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\omscmsy.fd"
File: omscmsy.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\omxcmex.fd"
File: omxcmex.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ucmr.fd"
File: ucmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
\symoperators=\mathgroup0
\symletters=\mathgroup1
\symsymbols=\mathgroup2
\symlargesymbols=\mathgroup3
LaTeX Font Info:    Overwriting symbol font `operators' in version `bold'
(Font)                  OT1/cmr/m/n --> OT1/cmr/bx/n on input line 78.
LaTeX Font Info:    Overwriting symbol font `letters' in version `bold'
(Font)                  OML/cmm/m/it --> OML/cmm/b/it on input line 79.
LaTeX Font Info:    Overwriting symbol font `symbols' in version `bold'
(Font)                  OMS/cmsy/m/n --> OMS/cmsy/b/n on input line 80.
LaTeX Font Info:    Overwriting math alphabet `\mathsf' in version `bold'
(Font)                  OT1/cmss/m/n --> OT1/cmss/bx/n on input line 88.
LaTeX Font Info:    Overwriting math alphabet `\mathit' in version `bold'
(Font)                  OT1/cmr/m/it --> OT1/cmr/bx/it on input line 89.
))
====================================

Local config file preload.cfg used

=====================================
("C:\Program Files\MiKTeX 2.7\tex\latex\base\preload.cfg"
File: preload.cfg 2004/02/04 v2.3a LaTeX Kernel (Uncustomised preload font setu
p)

("C:\Program Files\MiKTeX 2.7\tex\latex\base\preload.ltx"
File: preload.ltx 1998/08/17 v2.1g LaTeX Kernel (Font Preloading)
)) page nos., x-ref,
environments, center,
\@rightskip=\skip21
 verbatim, math definitions,
\jot=\dimen20
\interdisplaylinepenalty=\count30
\rootbox=\box13
\c@equation=\count31
\@eqcnt=\count32
\@eqpen=\count33
\@centering=\skip22
\topsep=\skip23
\partopsep=\skip24
\itemsep=\skip25
\parsep=\skip26
\@topsep=\skip27
\@topsepadd=\skip28
\@outerparskip=\skip29
\leftmargin=\dimen21
\rightmargin=\dimen22
\listparindent=\dimen23
\itemindent=\dimen24
\labelwidth=\dimen25
\labelsep=\dimen26
\linewidth=\dimen27
\@totalleftmargin=\dimen28
\leftmargini=\dimen29
\leftmarginii=\dimen30
\leftmarginiii=\dimen31
\leftmarginiv=\dimen32
\leftmarginv=\dimen33
\leftmarginvi=\dimen34
\@listdepth=\count34
\@itempenalty=\count35
\@beginparpenalty=\count36
\@endparpenalty=\count37
\@labels=\box14
\par@deathcycles=\count38
\@enumdepth=\count39
\c@enumi=\count40
\c@enumii=\count41
\c@enumiii=\count42
\c@enumiv=\count43
\@itemdepth=\count44
 boxes,
\fboxrule=\dimen35
\fboxsep=\dimen36
\@mplistdepth=\count45
\@mpfootins=\insert254
\@gtempa=\dimen37
\@gtempa=\dimen38
\@gtempa=\dimen39
\@gtempa=\dimen40
\@gtempa=\dimen41
\@gtempa=\dimen42
\@gtempa=\dimen43
\@gtempa=\dimen44
\@gtempa=\dimen45
\@gtempa=\dimen46
\@gtempa=\dimen47
\@gtempa=\dimen48
\@gtempa=\dimen49
\@gtempa=\dimen50
\@nxttabmar=\count46
\@curtabmar=\count47
\@curtab=\count48
\@hightab=\count49
\@tabpush=\count50
\@curline=\box15
\@curfield=\box16
\@tabfbox=\box17
\tabbingsep=\dimen51
\@chclass=\count51
\@lastchclass=\count52
\@chnum=\count53
\arraycolsep=\dimen52
\tabcolsep=\dimen53
\arrayrulewidth=\dimen54
\doublerulesep=\dimen55
\@arstrutbox=\box18
\@wholewidth=\dimen56
\@halfwidth=\dimen57
\unitlength=\dimen58
\@picbox=\box19
\@picht=\dimen59
\@ovxx=\dimen60
\@ovyy=\dimen61
\@ovdx=\dimen62
\@ovdy=\dimen63
\@ovro=\dimen64
\@ovri=\dimen65
\@xarg=\count54
\@yarg=\count55
\@yyarg=\count56
\@multicnt=\count57
\@xdim=\dimen66
\@ydim=\dimen67
\@linechar=\box20
\@linelen=\dimen68
\@clnwd=\dimen69
\@clnht=\dimen70
\@dashdim=\dimen71
\@dashbox=\box21
\@dashcnt=\count58
 title, sectioning,
\@secpenalty=\count59
\c@secnumdepth=\count60
\c@tocdepth=\count61

contents, floats,
\@floatpenalty=\count62
 footnotes,
\footins=\insert253
\c@footnote=\count63
\c@mpfootnote=\count64
\footnotesep=\dimen72
 index, bibliography, output,
\bx@A=\insert252
\bx@B=\insert251
\bx@C=\insert250
\bx@D=\insert249
\bx@E=\insert248
\bx@F=\insert247
\bx@G=\insert246
\bx@H=\insert245
\bx@I=\insert244
\bx@J=\insert243
\bx@K=\insert242
\bx@L=\insert241
\bx@M=\insert240
\bx@N=\insert239
\bx@O=\insert238
\bx@P=\insert237
\bx@Q=\insert236
\bx@R=\insert235
\topmargin=\dimen73
\oddsidemargin=\dimen74
\evensidemargin=\dimen75
\headheight=\dimen76
\headsep=\dimen77
\footskip=\dimen78
\textheight=\dimen79
\textwidth=\dimen80
\columnwidth=\dimen81
\columnsep=\dimen82
\columnseprule=\dimen83
\marginparwidth=\dimen84
\marginparsep=\dimen85
\marginparpush=\dimen86
\@begindvibox=\box22
\@maxdepth=\dimen87
\paperheight=\dimen88
\paperwidth=\dimen89
\col@number=\count65
\@topnum=\count66
\@toproom=\dimen90
\@dbltopnum=\count67
\@dbltoproom=\dimen91
\@botnum=\count68
\@botroom=\dimen92
\@colnum=\count69
\@textmin=\dimen93
\@fpmin=\dimen94
\@colht=\dimen95
\@colroom=\dimen96
\@pageht=\dimen97
\@pagedp=\dimen98
\@mparbottom=\dimen99
\@currtype=\count70
\@outputbox=\box23
\@leftcolumn=\box24
\@holdpg=\box25
\@kludgeins=\insert234
\@fpstype=\count71
\@reqcolroom=\dimen100
\@textfloatsheight=\dimen101
\c@topnumber=\count72
\c@bottomnumber=\count73
\c@totalnumber=\count74
\c@dbltopnumber=\count75
\floatsep=\skip30
\textfloatsep=\skip31
\intextsep=\skip32
\dblfloatsep=\skip33
\dbltextfloatsep=\skip34
\@fptop=\skip35
\@fpsep=\skip36
\@fpbot=\skip37
\@dblfptop=\skip38
\@dblfpsep=\skip39
\@dblfpbot=\skip40
\@lowpenalty=\count76
\@medpenalty=\count77
\@highpenalty=\count78

===========================================
Local configuration file hyphen.cfg used
===========================================
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\hyphen.cfg"
File: hyphen.cfg 2008/07/06 v3.8l Babel language switching mechanism
\l@english=\language0

("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\hyphen.tex")
\l@usenglish=\language0
\l@USenglish=\language0
\l@american=\language0
\l@usenglishmax=\language1

("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\ushyphmax.tex")
\l@dumylang=\language2

("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\dumyhyph.tex")
\l@nohyphenation=\language3

("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\zerohyph.tex")
\l@czech=\language4

("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\loadhyph\loadhyph-cs.tex"
EC Czech Hyphenation Patterns (Pavel Sevecek, v3, 1995)
("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\conversions\conv-utf8-ec.te
x") ("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\patterns\hyph-cs.tex"))
\l@german=\language5

("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\loadhyph\loadhyph-de-1901.t
ex" German Hyphenation Patterns (Traditional Orthography)
("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\dehypht.tex"
German Traditional Hyphenation Patterns `dehypht' Version 3.2a <1999/03/03>
(Formerly known under the name `ghyph31' and `ghyphen'.)))
\l@ngerman=\language6

("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\loadhyph\loadhyph-de-1996.t
ex" German Hyphenation Patterns (Reformed Orthography)
("C:\Program Files\MiKTeX 2.7\tex\generic\hyphen\dehyphn.tex"
New German Hyphenation Patterns `dehyphn' Rev.31 <2001-05-07> (WaS)))
\l@german-x-2008-06-18=\language7

("C:\Program Files\MiKTeX 2.7\tex\generic\dehyph-exptl\dehypht-x-2008-06-18.tex
" Using an 8-bit TeX engine.
("C:\Program Files\MiKTeX 2.7\tex\generic\dehyph-exptl\dehypht-x-2008-06-18.pat
"
German Hyphenation Patterns (Traditional Orthography) `dehypht-x' 2008-06-18 (W
L)))
\l@german-x-latest=\language7
\l@ngerman-x-2008-06-18=\language8

("C:\Program Files\MiKTeX 2.7\tex\generic\dehyph-exptl\dehyphn-x-2008-06-18.tex
" Using an 8-bit TeX engine.
("C:\Program Files\MiKTeX 2.7\tex\generic\dehyph-exptl\dehyphn-x-2008-06-18.pat
"
German Hyphenation Patterns (Reformed Orthography, 2006) `dehyphn-x' 2008-06-18
 (WL)))
\l@ngerman-x-latest=\language8
\l@espanol=\language8
\l@french=\language9

("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\loadhyph\loadhyph-fr.tex"
EC French hyphenation patterns (V2.12, 2002/12/11)
("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\special\spechyph-ot1-fr.tex
")
("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\conversions\conv-utf8-ec.te
x") ("C:\Program Files\MiKTeX 2.7\tex\generic\hyph-utf8\patterns\hyph-fr.tex"))
\l@patois=\language9
\l@francais=\language9
\l@polygreek=\language9
\l@magyar=\language9
\l@norwegian=\language9
\l@norsk=\language9
\l@portuges=\language9
\l@slovene=\language9
\l@british=\language9
\l@UKenglish=\language9
)
=================================
Applying patch file ltpatch.ltx
=================================
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ltpatch.ltx")
 ) )
Beginning to dump on file latex.fmt
 (preloaded format=latex 2009.5.17)
4423 strings of total length 58208
45172 memory locations dumped; current usage is 144&43164
3239 multiletter control sequences
\font\nullfont=nullfont
\font\OMX/cmex/m/n/10=cmex10
\font\tenln=line10
\font\tenlnw=linew10
\font\tencirc=lcircle10
\font\tencircw=lcirclew10
\font\OT1/cmr/m/n/5=cmr5
\font\OT1/cmr/m/n/7=cmr7
\font\OT1/cmr/m/n/10=cmr10
\font\OML/cmm/m/it/5=cmmi5
\font\OML/cmm/m/it/7=cmmi7
\font\OML/cmm/m/it/10=cmmi10
\font\OMS/cmsy/m/n/5=cmsy5
\font\OMS/cmsy/m/n/7=cmsy7
\font\OMS/cmsy/m/n/10=cmsy10
3633 words of font info for 14 preloaded fonts
33 hyphenation exceptions
Hyphenation trie of length 64115 has 1972 ops out of 35111
  88 for language 9
  411 for language 8
  408 for language 7
  235 for language 6
  207 for language 5
  63 for language 4
  2 for language 2
  377 for language 1
  181 for language 0
No pages of output.

Looks like it is well and truly broken (to me at least).

I am thinking of re-installing MikTex from scratch and take if forward again.

Any other suggestions?

Thanks,
Skanda.

Update!:
I managed to uninstall and re-install MikTeX

Update!:
Even after uninstalling-restarting-re-installing MikTeX, I am encountering the same problems. Could anyone be kind enough to give a set of instructions for resetting the cfg files and babel for MikTeX? There is no write-up on the net upto my own Google searching, and I am not expert enough to figure out what is going wrong...
Thanks in advance,
Skanda

[Stefan Kottwitz]

Perhaps you could work just for the moment without babel because english is supported by default?

Stefan

[skanda]

Hello Stefan_K,
Thanks for posting:

Perhaps you could work just for the moment without babel because english is supported by default?

Here's the real problem. I've re-installed MikTeX at least thrice today, and even after I completely omit the \usepackage{babel} command, I am getting the same old:

Code: Select all

(Fatal format file error; I'm stymied)

message with plain old latex .

I am truly in a soup now! Any other suggestions from your end?

Regards,
Skanda.

[Stefan Kottwitz]

Hi Skanda,

strange... try to update MiKTeX in addition to the installation, have a look here.

Stefan

[skanda]

Dear Stefan,

Hi Skanda,
strange... try to update MiKTeX in addition to the installation, have a look here.
Stefan

Just to be sure:

Start --> Programs --> MikTeX 2.7 --> "Settings" --> "General" tab Click on
Update Formats button.

Is this what I ought to do?

Thanks for the reply,
Skanda.

[Stefan Kottwitz]

Yes, this is what I've done earlier in such a situation. That error can occur if the format files do not fit to the tex version, rebuilding the format files could help and would be my first step.

Stefan

[skanda]

OK, I tried doing just that, then I ran lates on the mwe. I got the same error that I posted earlier. "Fatal format file error; I'm stymied"

What can we do next, Stefan?

Best,
Skanda.

[Stefan Kottwitz]

In that case I guess that there could be old MiKTeX files left from a previous installation. Perhaps try a clean installation again. Before the installation remove all MiKTeX files, you will find them probably below C:\Program Files\MiKTeX... have a look also to the user directories, "Documents and Settings", "Application data" if there are MiKTeX files.
Perhaps do a complete hard drive search for *.fmt to locate any format file that could be obsolete to remove it.

Of course those are just suggestions, be careful and don't delete important files, just the MiKTeX files that you could install again.

Stefan

[skanda]

C:\Program Files\MiKTeX... have a look also to the user directories, "Documents and Settings", "Application data" if there are MiKTeX files.
Perhaps do a complete hard drive search for *.fmt to locate any format file that could be obsolete to remove it.
Of course those are just suggestions, be careful and don't delete important files, just the MiKTeX files that you could install again.
Stefan

OK,
These steps will take some time. Perhaps by tomorrow I will be able to let you know of the outcome!

Dear God in heaven! What a nightmare this is turning out to be!

Thanks for your help.
Best,
Skanda.

[skanda]

Hello there Stefan,
I am back and I have good news and bad news.
Good News:
MikTeX is back and working on my PC!
Bad News:
Commenting the babel package line in the mwe.tex file results in an error!
Sorry about the long post.

Code: Select all

D$  latex mwe.tex
This is pdfTeX, Version 3.1415926-1.40.9 (MiKTeX 2.7)
entering extended mode
(mwe.tex
LaTeX2e <2005/12/01>
Babel <v3.8l> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, german-x-2008-06-18, ngerman-x-2008-06-18, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\octavo\octavo.cls"
Document Class: octavo 2007/03/07 v1.2 a LaTeX document class
("C:\Program Files\MiKTeX 2.7\tex\latex\octavo\oct10.clo"))
("C:\Program Files\MiKTeX 2.7\tex\latex\lettrine\lettrine.sty"
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty")
Loading lettrine.cfg
("C:\Program Files\MiKTeX 2.7\tex\latex\lettrine\lettrine.cfg"))
("C:\Program Files\MiKTeX 2.7\tex\latex\hyperref\hyperref.sty"
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\ifpdf.sty")
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\ifvtex.sty")
("C:\Program Files\MiKTeX 2.7\tex\latex\ifxetex\ifxetex.sty")
("C:\Program Files\MiKTeX 2.7\tex\latex\oberdiek\hycolor.sty"
("C:\Program Files\MiKTeX 2.7\tex\latex\oberdiek\xcolor-patch.sty"))
("C:\Program Files\MiKTeX 2.7\tex\latex\hyperref\pd1enc.def")
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\etexcmds.sty"
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\infwarerr.sty"))
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\hyperref.cfg")
("C:\Program Files\MiKTeX 2.7\tex\latex\oberdiek\kvoptions.sty")
Implicit mode ON; LaTeX internals redefined
("C:\Program Files\MiKTeX 2.7\tex\latex\ltxmisc\url.sty")
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\bitset.sty"
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\intcalc.sty")
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\bigintcalc.sty"
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\pdftexcmds.sty")))
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\kvsetkeys.sty")
("C:\Program Files\MiKTeX 2.7\tex\generic\oberdiek\atbegshi.sty"))
*hyperref using default driver hdvips*
("C:\Program Files\MiKTeX 2.7\tex\latex\hyperref\hdvips.def"
("C:\Program Files\MiKTeX 2.7\tex\latex\hyperref\pdfmark.def"))
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\newcent.sty")
("C:\Program Files\MiKTeX 2.7\tex\latex\fncychap\fncychap.sty") (mwe.aux

! Package babel Error: You haven't loaded the option english yet.

See the babel package documentation for explanation.
Type  H <return>  for immediate help.
 ...

l.16 \select@language{english}

? r
OK, entering \nonstopmode...
) ("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\ot1pnc.fd")

Package hyperref Warning:  draft mode on.

("C:\Program Files\MiKTeX 2.7\tex\latex\hyperref\nameref.sty"
("C:\Program Files\MiKTeX 2.7\tex\latex\oberdiek\refcount.sty")) [1] [2]
! TeX capacity exceeded, sorry [input stack size=5000].
\@currentlabelname ->\contentsname
                                   \@mkboth {\MakeUppercase \contentsname } ...
l.22     \tableofcontents

Output written on mwe.dvi (2 pages, 2176 bytes).
Transcript written on mwe.log.

D$

I am travelling out of town for the next two days. If I am able to catch your reply in the next hour or so and I am able to implement it, well and good. Else you will hear from me in three days or so.

Thanks in advance,
Best,
Skanda.